• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Chillernr1

  1. C

    Chiller's Hybrid Level 10

    Removed the two Coolit pumps and replaced them with : Swiftech MCP355 Aquacomputer top koolance heatsink Bitspower Z-multi red 40mm res Temps are little lower now, higher flow. Just need to make a nice mounting for the pump res combo (strapped for now) , make a fan in the bottom and...
  2. C

    Chiller's Hybrid Level 10

    some small adjustments in rig, so really everything is how i whant it : this res comes in place of the top Coolit pump, and the one under it will be changed by a koolance PMP-400 : Bitspower Z-Multi 40mm Water Tank - Ice Red also will ad a fan red led in bottom plate for some extra...
  3. C

    Chiller's Hybrid Level 10

  4. C

    Chiller's Hybrid Level 10

    some pics of extra PhysX vga that arrived, some adjustment on fan, fan did make noise above 80%, fixed New cooling paste on GPU = Evga Frostbite, fixed New thermal pads better conductivity, fixed Cleaned out, fixed
  5. C

    Chiller's Hybrid Level 10

    little update, needs some finishing off, thirth vga adding for PhysX, bodem plate placing in, and remove dust :
  6. C

    Chiller's Hybrid Level 10

    yes, but not with this mobo, costs a little to much for that, that's why i made 90° connector for it.
  7. C

    Chiller's Hybrid Level 10

    that's the idea ;p
  8. C

    Chiller's Hybrid Level 10

    Small update :
  9. C

    Chiller's Hybrid Level 10

    Little update : Next copper bars are bended the same and almost on the good lenght, and 2 PciE connectors are almost ready to :
  10. C

    Chiller's Hybrid Level 10

    I is not finished yet, it need to be insulated offcourse and the solder work need to be clean also and get back. thanks
  11. C

    Chiller's Hybrid Level 10

    thanks, always on the look out for mods that are never been done
  12. C

    Chiller's Hybrid Level 10

    update, first is allmost finished, need some detail work done, and made black, but it works like a sharm and no cables there anymore :
  13. C

    Chiller's Hybrid Level 10

    like this the connectors will be : each vga 2 connectors, but behind each pair there are 3x 12v rails. So vga's will get enough power (and made shure the cables are not to tin for that power transfer) only those bars need to come at the same hight as the connectors on vga's, so...
  14. C

    Chiller's Hybrid Level 10

    Last stuf making for vga's, making 5 more of these, cut them on lenght, other side also connectors, isolate them, make them black :
  15. C

    Evga Untouchables Rev0.1 testing on GTX285

    RETAIL toy now : http://www.evga.com/products/moreInfo.asp?pn=100-UT-0400-BR&family=Accessories%20-%20Hardware&sw=4
See more
Back
Top