• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Brimstone67

  1. B

    E7400 - EP45-UD3R - GSkill DDR2 1066 OC Help

    I thought I would relay this bit of news about my system. It has been running fine since Casper's help with OC. I woke up this morning (system is never off) to my monitor blinking. Couldn't get it to display, so rebooted. Everything worked fine. Started to surf a bit and got a BSOD. Upon...
  2. B

    OCing with E7400 on GA-EP45-UD3R?

    Additional info found here http://www.hardforum.com/showthread.php?t=1398603 I have almost the same setup as you.
  3. B

    Overclocking E7200 with 4pin instead of 8pin?

    I'm in the same boat as you. So I bought a double molex to 8 pin connector for the motherboard plug. I'm overclocking my e7400 2.8 to 3.5 with no issues....yet :) It was like a 5 dollar part from a local shop, but you can get them online too.
  4. B

    E7400 - EP45-UD3R - GSkill DDR2 1066 OC Help

    Raised Cpu Host Frequency to 334 to even out to 3.5hmz. 5 cycles of Prime95. Max temp I saw was 73c. Should I be worried?
  5. B

    E7400 - EP45-UD3R - GSkill DDR2 1066 OC Help

    Ok, Used the original settings recommended by Casper, forced mem timings and set to 2.0v. Upped Vcore to 1.35 and seemed stable for the first run of Prime95. After I took the snapshot temps hit 70 so I stopped it. Bit worried about temps since I'm on stock for the time being. WEI (Windows...
  6. B

    E7400 - EP45-UD3R - GSkill DDR2 1066 OC Help

    Ok, set CMOS as you advised. Booted fine. Did a couple of small things with no problems. I Then ran Prime95 and failed almost instantly. Here is the CMOS as set and Prime95 screen. Sorry the quality on the 1st Cmos screen is a bit blurry but readable. So I noticed that the clocks...
  7. B

    E7400 - EP45-UD3R - GSkill DDR2 1066 OC Help

    Awesome Casper, Thanks! Gonna give it a go when I get home from work. The timings on the Gskill for 1066 are 6,6,6,18. Not the best, I know, but they were pretty cheap and it's tough scrapping together cash for a hobby with a wife/baby/mortgage etc... I'll let ya know how it goes, thanks...
  8. B

    E7400 - EP45-UD3R - GSkill DDR2 1066 OC Help

    Howdy Folks! I'm pretty new around here, I've been lurking for a couple months and boy do love this site! I could spend my entire work day just reading these forums. Ok, ok, I do already but don't tell my boss! Anyway, I just put together a new rig and everything is running stock atm. It...
See more
Back
Top