Recent content by bri-guy30

UPDATE - PROBLEM SOLVED This is for anyone who was following this thread. I have solved the memory problem. The solution involved the use a different memory. I bought DDR2-800 memory from Corsair and everything is just fine. I was actually able to run Memtest with no errors with the BIOS...

Bobbarker... I was sucessful at passing tests with 2x2GB ram in any possible slot combination on the M3A78-EM. I was sucessful at passing tests with 4X512MB ram in all 4 slots. However, I have been unable to run 4X4GB modules without errors... One other thing Bob. How HOT would you say...

MEMTEST passed all tests using 2GB of G.Skil in the 4 stick configuration using F2-6400CL4D-GBPK. Where does this leave me? RMA the 4X2GB set and exchange for something else?

I have confirmed that the ASUS M3A78-EM does NOT support 4 modules of DDR1066 installed in all four slots. DDR1066 is only supported on 2 slots at a time. I am still unable to find a solution to the memory problem... Recently I tried reducing the load on the power supply. I have a...

OK... So i ran the test with only slot 3 & 4 and Memtest passed with no errors. What does this mean now? I can get it to pass with only 2 sticks in any slot but never with 4 sticks. I borrowed a set of different memory to try later tonight. I just realized I was bumping up the "chipset"...

Thank you for the reply. I will try memory in only slot 3 and 4. However, this is against what the user manual says is possible. It says: slot 1 only (single stick), slot 2 only (single stick), slots 1 & 3 (single channel), slots 1 & 2 (dual channel), slots 1 & 2 & 3 & 4 (dual channel)...

If anyone can offer assistance I would appreciate it... I have been testing memory for the last 4 days. I have a M3A78-EM with bios 7xx update. I have 4 x 2GB G.Skill DDR2 800 RAM model F2-6400CL5D-4GBPQ. This memory is listed on the recommended vendor list in the user manual of the...