• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by BaxterTheFly

  1. B

    Bulldozer project - AMD Tribute

    So, i bet this is the thing you didnt expect to see :) I switched to below tubing to soft tubing in order to have a little more flexibility and room for working, also i made it so that the top part is able to tip over so i can clean, manage cables, etc etc.. This is the last big change in the...
  2. B

    Bulldozer project - AMD Tribute

    Dry fitting the pipes to the current look, there will be another pipe that will go on the other side of the 24 pin that will go from GPU to res, but will go under than it will come back up, to res :) I hope you like the progress so far, as i was unable to work on it for good few months...
  3. B

    Bulldozer project - AMD Tribute

    So i have been doing what seems to be the biggest problem... how to make roof and still look sharp :) i think this will be ok, and not make the roof stand off too much, the roof consists out of board and a U profile, the sides will go on the inside of a U profile, and also it will house a led...
  4. B

    Bulldozer project - AMD Tribute

    Ok,+some things i think you are gonna like that has been done to the mod :D 16mm Copper tubing: Changed the board rotation, its laid down now: Added professional grade backplane ;)+ And the drawers: and the look before painting from different perspective: Also, the 480EKWB rad...
  5. B

    Bulldozer project - AMD Tribute

    Hello guys and really sorry for not updating, i have had some massive lack of time so i didn't get to do anything that i wanted. This is a little tease and i promise i will post full update log once i get time to work on it ;) . Also, tomorrow is the day i fire this thing in its cage as i have...
  6. B

    Bulldozer project - AMD Tribute

    Been a while since i posted, and loads of things happened since than :) Enjoy the slideshow XD Top part still needs some minor adjustments, it now opens quite nicely with some support from suspensions :) I dont know about you, but it looks more massive than it used to :)...
  7. B

    Bulldozer project - AMD Tribute

    Here is one long overdue update.. bodywork is taking much longer than i anticipated I ended up saving me the trouble with doors that open like this.. so the original idea --- to the water Made my life allot easier when it came to cooling :D fans can now be securely mounted to...
  8. B

    Bulldozer project - AMD Tribute

    UPDATE!!!, still not painting :( ran in to some work related issues :P but still sort of big update :) 1) The "Nose job": 2) FINALLY! Fan mount... 3) Polyester filler : Hole for 24-pin done old fashion little plate style with |-type screws :D...
  9. B

    Bulldozer project - AMD Tribute

    A few more days left, I will finish the mod before August :D As i didnt want to post pictures that make no sence, posting pictures where only i could see the difference, i waited a bit and once i had done things i deem'd made a change, i made a little walktrough around what i have done and...
  10. B

    Bulldozer project - AMD Tribute

    I've got some stuff inside of the case just to check how everything fits and looks in the cabin :D I hope you like the overall look inside the cabin :) its a bit tight but I like it like that :) only main ssd's will be inside the cabin, hard drives will go under the entire thing...
  11. B

    Bulldozer project - AMD Tribute

    Hehe tnx man :) Btw here is an update after a big long while I fixed the doors so they can open correctly now and i had to make them open up top because of clearance issues :/ This is first layer of acrylic filler This is 2nd, and there might be a tird to fill the smallest holes :)
  12. B

    Bulldozer project - AMD Tribute

    Peeps, i know pictures are awful but my camera bateries ran out :( so i had to use my camcorder. I know most of you will criticize my choice to go for wood instead of alu but i had my own good reasons :) Also as you can see, my suspensions came and i am super happy about it :) Deatails...
  13. B

    Bulldozer project - AMD Tribute

    I made a compromis with mud flaps and went llike this, i think you will like it :D And the demonstration of power!!! :D Just for you to see how sturdy this thing really is... ( also to mention i am 192cm tall ) I hope you can gasp the sheer size of this thing :D At some point i will...
  14. B

    Bulldozer project - AMD Tribute

    It sort of will set on threads, but only by look, i will make a bit terain in between the threads and bottom board that will go underneath everything... it will look as if it rides on dirt! (volcanic rock that is as light as styrofoam and looks the part )
  15. B

    Bulldozer project - AMD Tribute

    Ok, i got few pics of progress and a question :D The spoon will be simmilar to this but i will str18 it a bit, add some mesh on top, make it more robust with stirofoam and such... it will look really good with suspensions and all painted ;) trust me, i have it in my head!!! Also...
See more
Back
Top