Recent content by Aznbull

Thanks alot exactly what i was looking for.

Hi DonDan. I'm a big fan of you and I really love your idea and designs. I've been reading about your new case Dan C4 and I'm wondering why you didn't design it as the A4 with the bottom as on C4. I really like the way you kept the CPU and GPU in seperated side on the A4, and if you could add...

That aero cool Cube has same size as most M-atx / Atx cases, and that's not small.

# Skott The Bitfenix prodigy is not a small case, the ITX version is the same sixe as the M-atx version. At that size u might take a look at sg09/sg10. If u want a silence case, just replace all the hardware with moving parts out with passive cooling :), or u can install PWM fans that only spins...

I've mount 2x 2.5" 750gb Wd black near the edge of the vent holes, if u look closely on the opposite of the fan on the NH D14, there's a white/grey area behind the vent holes. I've mount them using those holes for the Hdd bracket. U can also mount Hdd's in the bottom of the case, and idd this...

@dennisjai It's a Nh D14

I have the Jonsbo U3. Atm I have an Asus Itx board in there, but my plan is to fill it up with a M-atx and a HUGE air cooler. The Gpu is a GTX 670 FTW, it's the same size as a ref GTX680

I got the Jonsbo U3 case, atm I've an Asus Itx board in there, but my plan is to fill it up with a M-atx and a HUGE air cooler.

@Cratboard Np. I'm thinking of a ribbon to cover up the gap between the fron bezel and the case, i'll upload a picture when i'm done with it.

Lovely build it is very similar to my second sg05.

Here's pictures of the Mini beast SG05 with NH D14. TOP FRONT Back SIDE with GPU exhaust Here's how it looks like with the GTX 670 FTW, nice and tidy. Here's a Closeup of the ODD mount and the front bezel. The RED marks is where I use the screws to hold the front bezel, the BLUE mark...

I"ll take a pic of how I've mount that dvd, and how I've fasten the front bezel.

Have you considered, that you can extend the front bezel with 1-2 cm. Look at my pics I've extend it with 1,5 cm. I've have cut a hole in the front metal to make space for future gpu upgrade. I've replaced the hd 6850 in my pictures with a gtx 670 ftw, and theres plenty of space. The temps are...

Here you go dual radiator in sg05 http://hardforum.com/showthread.php?p=1039142006

I have cut a big hole behind the sg05 abit above the IO plate. It fit a 120mm fan, if I use nh d14 as intake then it will draw air from behind to the front, and the psu will exhaust hot air. Something like positive air pressure.