• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Anifinity

  1. A

    Second network adaptor causing the first to lose connectivity

    I have no qualms about setting up routing, I simply want to know how I can do this seeing as the NIC's cannot see each other's subnet. How can I set a route from one NIC to another when they are not joined as part of a subnet? If you can give some instruction I am more than willing ti set this up.
  2. A

    Second network adaptor causing the first to lose connectivity

    [deleted, see above]
  3. A

    Second network adaptor causing the first to lose connectivity

    How would this work out? the 2 NICS are on completely seperate networks and would not be able to see the same primary gateway. For example, my main connection uses gateway 192.168.1.1 on its own subnet while the second NIC is on gateway 192.168.0.1, also with its own subnet. The moment I...
  4. A

    Second network adaptor causing the first to lose connectivity

    This would just take down my internet and there would be no where for the packets to go?
  5. A

    Second network adaptor causing the first to lose connectivity

    They are already on different subnets. Ethernet is on subnet 255.255.255.0 through mt router while Ethernet 3 is using 255.255.255.192 direct to my secondary modem. Instead of deleting the persistent route I changed the adapter back to DHCP. The route was automatically added when I configured...
  6. A

    Second network adaptor causing the first to lose connectivity

    Scratch that last post, it looks like when the connection goes down and I ping using the main adapter it is unable to resolve using IP or domain. To summarize so far: Ethernet = primary connection with unique modem (realtek NIC) Ethernet 3 = secondary connection with unique modem (intel NIC)...
  7. A

    Second network adaptor causing the first to lose connectivity

    The application accesses the internet in general. How can I find out if it is indeed a conflict issue? Ethernet is a Realtek gigabit adapter (Realtek 8110SC) Ethernet 3 is an Intel Pro/1000 CT gigabit adapter Edit 1: After looking into things the pci-e port I was using was on the same IRQ as...
  8. A

    Second network adaptor causing the first to lose connectivity

    Yes, both adapters are set for DHCP. I do not have a static IP on either adapter. Ethernet is connected to a router while Ethernet 3 is direct to secondary modem.
  9. A

    Second network adaptor causing the first to lose connectivity

    this would work for the program I have setup, however I dont want to be forced into virtualization. Worst case scenario I can dedicate another computer to that connection but I would rather be able to use the two connections on the same computer if at all possible
  10. A

    Second network adaptor causing the first to lose connectivity

    Hi guys, I recently installed a second network adapter in my computer. This second adapter is attached to its own cable modem and has its own dynamic IP address and is named Ethernet 3. In addition to Ethernet 3, I also have my main motherboard network adaptor named Ethernet which is connected...
  11. A

    Overclocking my i7 950

    Hey [H] members, I have been browsing the forums for many years but haven't really posted much. I have decided I would like to try overclocking my i7 950 + Asus Sabertooth X58 I have had for several years. I have read a bit about what needs to be done, including the [H]review of this...
  12. A

    Help with rebuilding an NTFS partition

    Thanks a lot for the link. I ended up recovering the files with recovery software before I saw this post so I didn't get a chance to test it but it looks like its exactly what I would have needed. I will definitely give it a try in the future should this happen again. Thanks.
  13. A

    Help with rebuilding an NTFS partition

    Earlier today I received the "Delayed Write Failed" message for F:\ and my F drive was no longer visible under Explorer or Disk Management. I scanned the problematic drive with recovery software and it detected all the files just fine so I am sure they are intact. The computer once again...
  14. A

    Do i get this right? Crysis is unplayable on VeryHigh settings on any current system?

    That's because I am at work but not "working", obviously :P
  15. A

    Do i get this right? Crysis is unplayable on VeryHigh settings on any current system?

    If at all possible try and run at your monitors native resolution. Unfortunately since you are running a 7800GS you are really going to have to tweak your settings to get something you will be happy with. I would suggest trying 1680 x 1050 and scaling the detail settings until you reach an...
See more
Back
Top