• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by adamlee05

  1. A

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    "980ti" used 4 times in 3 short sentences. Doesn't exist yet, maybe a 780ti. Not sure what issue you're having in your case, but a standard 120x25mm fan can fit under a reference 780/780ti/Titan/970/980 without touching the GPU. I Removed my grills after doing proper cable management of the...
  2. A

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    CPU cooler height is limited to 130mm - not 105mm like the original post says - correct? I ask because I intend to replace my H220 with the new Noctua NH-U9S, which is 125mm from the CPU contact surface to the top of the cooler. I just want to make sure if the 130mm specification from the Ncase...
  3. A

    NCASE M1 v2 Build Thread

    Thanks for the reply :) I'm replacing my H220 with the new Noctua NH-U9S, and moving the HDD from the bottom to the side-mount cage, removing my side intake. That's my primary reason for wanting to run bottom intakes. Thanks again for the input!
  4. A

    NCASE M1 v2 Build Thread

    Considering picking up 2 Noctua NF-S12A PWM fans for the bottom on the case, however I have a reference-blower EVGA GTX 980 SC and the clearance will only be a few MM. The side panel is not an intake. Do I need to run a more pressure optimised NF-P12 due to the area-restriction caused by the...
  5. A

    Asus ROG Maximus VII Impact

    I knew I'd seen 33mm listed somewhere! It's odd though, if you click on the Infosheet link, the PDF illustration shows 28mm. Either way I'm hoping it will work, fan elevated or not, with a second fan inside of the 130mm limit of my M1.
  6. A

    Asus ROG Maximus VII Impact

    I'm highly considering picking up the just released Noctua NH-U9S to replace the H220. I'm only curious as to whether or not adding a second fan would be an issue due to the CMOS battery. Noctua shows that there is 28mm of clearance between mounting surface and lower fan edge. Anyone have any...
  7. A

    Asus ROG Maximus VII Impact

    Hey guys, been trying to move away from my H220 and find the best air cooler for use on the MI7 in an M1. I know an AXP-100 and NH-C12 work, but has anyone been able to confirm anything better? RAM clearance isn't an issue.
  8. A

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    What?
  9. A

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    The SX600-G comes with a shorter set already, Its just that the M1 has everything laid out so efficiently I'd need extremely shortc custom cables. May end up trying to make my own.
  10. A

    Asus ROG Maximus VII Impact

    The bracket for the WiFi card has two screw holes to give you the option to choose using the IO screw hole or motherboard for convenience of removal, not to use both holes for securing it. Many cases won't allow you to remove the motherboard oriented screw without removing the entire...
  11. A

    Asus ROG Maximus VII Impact

    I agree with CHANG3D on this. Installed my system last night in an M1 with an 220. Like he said, if you route the antenna cables under the sound card, if you ever remove the WiFi daughterbaoard to instal an PCIE SSD, you'll be limited on working room because your cables will be stuck. I just...
  12. A

    Silverstone SST-SX600-G 600w Gold SFX

    I'd like to shorten all of the cables for my M1 build, or even just make custom ones. Does anyone know if any of the moddiy modular connector kits are compatible with the SX600-G? They're only like $25 and I could keep the original cables uncut for later if so.
  13. A

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Yeah inside the standoffs. Two had globs of black material inside the threads (upper left and right), and the other two had enough of the same material to prevent threading past 2 or 3 full turns. I ended up driving across town to work and grabbed a tapping set from our machine shop, which made...
  14. A

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Additionally, the upper-right standoff free spins after a few turns of the screw, which is now stuck in thes standoff. Is this real?????? My beautiful case is now useless. Great QC. Do I need to talk to necere or wahaha about this? I doubt I can use this for my build now, as I can't secure the...
  15. A

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Can't assemble my build because of the excessive paint inside the motherboard standoffs. Already stripped one screw trying to clear out the paint, and I'm worried I'm going to bend the case due to the amount of torque I'm having to use to turn the screws. No, they're not cross threaded..... Uhg.
See more
Back
Top