upgrading from nforce2 barton; need new build advice :)

jupitersj

Weaksauce
Joined
Apr 3, 2005
Messages
71
Hey everyone... it has been awhile :eek:

I like to stretch my PC use out over many years(I think this one was 5?)

My current "beast" is:
Asus A7N8X-E Deluxe (used to be a7n8x-d rev 2 till memory controller went bye-bye)
xfx 7600gt (upgraded from ati 9700pro; loved this card forever)
1 gig corsair xms paired 512x2 (old board hated my kingston hyperx :confused: )
lots of dead WD drives :D
Antec True 480w (TrueBlue)
Barton 2500 166(333)x11 1.89ghz~ oc@250(500)x10? 2500mhz~
ThermalRight SLK-800A Heatsink w/ ThermalTake Smartfan II @ 84cfm?
Chieftec Blue Dragon
Lite On Burner blah blah

Long story short: Built many PC's for friends using asus a7n8x variants..always had problems(sides my sweet overclock) doa, battery suicide cmos`, ide controllers etc and hatred for nvidia boards ensued :eek:

I haven't built anything since now so I was a lil rusty but I did build this for a co-worker 2 months ago

vista 64 prem
e8400 wolfdale
abit ix38 quad gt
4gb 2x2 geil skill?
antec sonata III w/ earthwatts psu (500 or 550 i don't remember)
8800gts
wd 320?+ sony burner (both sata)

my only troubles were not turning on achi? :D and hearing bee boo bee boo bee boo for 4 hours because the bios didn't like the wolfdale and was reporting 170ish c temperature haha...that took awhile to figure out before I installed uGuru.

Anyway I just want to play new games/internet/program/porn/torrent anime/stuff/porn (did I mention porn?). I do like to tinker but this build is something I want to try to proof alittle for future upgrading.

I will be playing on a 1680x1050 BenQ FP222W H and that is my target resolution. After 11 years on an old NEC 17xv+ multisync you can imagine how my eyes loved me :cool:

The only room I have my game/pc setups stationed in unfortunately usually run 10 degrees higher than the rest of the house due to the previous owners making the garage 2 storage rooms with no way for escape of heat. The room is stationed above 12x9 and I value stability and cooler running system components than overclocking for my build this time. This is mainly why I chose 45nm processor and possibly 9800gtx. I also need advice on an after market cpu cooler(I always loved thermalright...not take...are they still the best?) that must fit the motherboard without cutting/lapping and/or bending heatpipes/capacitors.

How does this sound?


ABIT IX38 Quad GT LGA 775 Intel (would like alternatives please)
GeForce 9800 GTX(G92) 512MB 256-bit GDDR3 (I hear 8800gtx are very hot running?)
CORSAIR CMPSU-750TX 750W(I wanted modular hx620 but I can deal with tx for better price and future upgradeability from better 12v line(s))
Intel Core 2 Duo E8400 Wolfdale 3.0GHz LGA 775 65W
or

Intel Core 2 Quad Q9450 Yorkfield 2.66GHz 12MB L2 Cache LGA 775 95W

CORSAIR XMS2 DHX 4GB (2 x 2GB) 240-Pin DDR2 800
or
Some G Skill 1066 for cheaper

Seagate Barracuda ES.2 ST3750330NS 750GB 7200 RPM SATA 3.0Gb/s Hard Drive
ASUS 20X DVD±R DVD Burner with LightScribe Black SATA Model DRW-2014L1T -
Microsoft Windows Vista Home Premium SP1 64-bit English 1pk DSP OEI DVD - OEM

I'd like case suggestions that would hold large videocards too. I'd prefer something without the bling bling lights and guady plastic shape designs(non design doors are okay). It needs functionality mostly with 120mm or larger fans(a few at most) + case/fan filtering, vibration dampening drivebays hopefully, maybe removable or sideways drive trays...window would be nice but not necessary. No Jet Engines!!! Something very simple and elegant that doesn't look like a lian li midtower munchkin (though midtowers are fine if they fit everything). There was this awesome silver metal coolermaster I saw months go but I lost the link(can't find it on newegg).

My budget is around $1500. I'll be shopping online at newegg/zipzoomfly/svc/ or any suggestions. I'd also like a new keyboard..yes I'm lefthanded and use the mouse in my lefthand so those "gamerz zomg xtra lefthand wasd pad keyboards" are useless to me.

fun fact: I played EverQuest for 9 years o_O Learn something everyday :)
 
I'm kinda tired atm, but a few things stick out at me:

-Nothing wrong with Gskill
-For the price I don't see any reason not to go with a quad
-Why the ES2s?
 
With the monitor you have, stick with a P35 motherboard.

Danny Bui said:
Gigabyte GA-EP35-DS3L Intel P35 Motherboard - $90
MSI P35 Neo2-FR Intel P35 Motherboard - $110
DFI BloodIron P35-T2RL Intel P35 Motherboard - $110
Gigabyte GA-EP35-DS3R Intel P35 Motherboard - $120
DFI LanParty DK P35-T2RS Intel P35 Motherboard - $130
Asus P5K-E Intel P35 Motherboard - $140
Gigabyte GA-EP35-DS3P Intel P35 Motherboard - $150
Asus P5K-E/Wifi-AP Intel P35 Motherboard - $150
Abit IP35 Pro Intel P35 Motherboard - $170
Gigabyte GA-EP35-DS4 Intel P35 Motherboard - $170
Gigabyte GA-EX38-DS4 Intel X38 Motherboard - $207

Just to help you out: If you don't need RAID, more than 4 SATA ports and only need semi-decent overclocking, check out the DS3L. If you need 5 SATA ports, 2 eSATA ports, slightly better overclocking, and a second PCI-E x16 port, then get the Neo2-Fr. If you want heavy overclocking options and six SATA ports, check out the Blood Iron. If you like the BloodIron but want significantly better overclock stability and options, go for the LanParty. If you want 8 SATA ports, RAID, legacy ports and high overclocks and optional eSATA, than the DS3R is a good choice. If you want the DS3R but need Firewire and a second PCI-E x16 port, then go for the DS3P. If you like the DS3P but need 3 PCI slots instead of the DS3P's 2 PCI slots and like having non-optional eSATA, go for the Asus P5K-E. If you like the P5K-E but need wifi, then go for the P5K-E/Wifi-AP. If you want something that can overclock pretty damn high along with RAID, eSATA ports and firewire connections, than the IP35 Pro. If you like the DS3P but want better cooling for overclocking, then go for the DS4. Do note that the Asus website can be slow sometimes.

And some CPU cooler suggestions:


The 8800GTS is actually as good as the 9800GTX yet costs a bit less. The 8800GTX is a better gaming option, now that it's come down in price, but I prefer the 8800GTS/9800GTX's onboard video encoding/decoding features (which offload the work from the CPU). Consider the EVGA brand; in addition to its step up policy, should you decide to get one of the newer cards coming next month, it has arguably the best customer service/warranty around.

Get the E8400 if this machine is more for gaming or the Q9450 if you consider yourself more of a multitasker. If you're trying to save some money, the Q6600 is a good alternative to the Q9450 as well as a pretty good overclocker. You don't need any special "high performance" RAM, so buy a DDR2 800 kit if you get the Q6600 or if you're keeping everything at stock speeds/settings, or the DDR2 1000 if you're planning on overclocking the E8400/Q9450. I believe that NewEgg has DDR2 800 and DDR2 1000 kits from G.Skill for around the same price. (You can often find a DDR2 1000 kit for less than you would a DDR2 1066 kit).

You know, if you're not that choosy regarding cases, you could settle for the same Sonata III case/PSU combo that you used for your coworker. Buy.com has a nice deal on it: $110 with free shipping. (And yes, it will fit the 9800GTX, which is the same approximate size as the 8800GTS.)
 
I'm kinda tired atm, but a few things stick out at me:

-Nothing wrong with Gskill
-For the price I don't see any reason not to go with a quad
-Why the ES2s?

I figured the business class harddrive from seagate would fair abit better than consumer grade; WD's run hot and i've gone through way too many of them through the years of computing. Every Seagate drive I've owned has been quieter, cooler, and lived longer.

plus it is the only 750g seagate on newegg avail atm :)
tiraides said:
With the monitor you have, stick with a P35 motherboard.

Quote:
Originally Posted by Danny Bui
Gigabyte GA-EP35-DS3L Intel P35 Motherboard - $90
MSI P35 Neo2-FR Intel P35 Motherboard - $110
DFI BloodIron P35-T2RL Intel P35 Motherboard - $110
Gigabyte GA-EP35-DS3R Intel P35 Motherboard - $120
DFI LanParty DK P35-T2RS Intel P35 Motherboard - $130
Asus P5K-E Intel P35 Motherboard - $140
Gigabyte GA-EP35-DS3P Intel P35 Motherboard - $150
Asus P5K-E/Wifi-AP Intel P35 Motherboard - $150
Abit IP35 Pro Intel P35 Motherboard - $170
Gigabyte GA-EP35-DS4 Intel P35 Motherboard - $170
Gigabyte GA-EX38-DS4 Intel X38 Motherboard - $207

Just to help you out: If you don't need RAID, more than 4 SATA ports and only need semi-decent overclocking, check out the DS3L. If you need 5 SATA ports, 2 eSATA ports, slightly better overclocking, and a second PCI-E x16 port, then get the Neo2-Fr. If you want heavy overclocking options and six SATA ports, check out the Blood Iron. If you like the BloodIron but want significantly better overclock stability and options, go for the LanParty. If you want 8 SATA ports, RAID, legacy ports and high overclocks and optional eSATA, than the DS3R is a good choice. If you want the DS3R but need Firewire and a second PCI-E x16 port, then go for the DS3P. If you like the DS3P but need 3 PCI slots instead of the DS3P's 2 PCI slots and like having non-optional eSATA, go for the Asus P5K-E. If you like the P5K-E but need wifi, then go for the P5K-E/Wifi-AP. If you want something that can overclock pretty damn high along with RAID, eSATA ports and firewire connections, than the IP35 Pro. If you like the DS3P but want better cooling for overclocking, then go for the DS4. Do note that the Asus website can be slow sometimes.


And some CPU cooler suggestions:

Quote:
Arctic Cooling Freezer 7 Pro HSF - $24
Xigmatek HDT-S963 92mm Rifle HSF - $25
Scythe SCNJ-1100P Ninja HSF - $36
Xigmatek HDT-S1283 120mm Rifle HSF - $37
Tuniq Tower 120 HSF - $50
ZEROtherm Nirvana NV120 120mm HSF - $50
Thermalright Ultima-90 HSF - $46 & Panaflo FBA09A12M 92mm Fan - $3
Noctua NH-U12P HSF - $60
Thermalright Ultra-120 Extreme HSF - $57 & Scythe S-Flex SFF21E 120MM Case Fan - $14

Thanks for the cooler suggestions; I'll look up reviews on them. Why the P35 over the IX series? The reason why I want higher than ddr 800 is more overhead if I do decide to overclock in the far future as my system starts to become a dinosaur and/or new chips come out with higher fsb's that my motherboard might support in the future with bios update. I'm not going RAID right now but eventually I will probably do mirror RAID for documents/anime/etc. I have a feeling I'd probably do it in an external enclosure depending on the case I choose. I don't need 45,000 connectors... just enough for a burner and a drive or two max. esata is nice because it helps with the future proofing which I mentioned has to be woven into my build(which is why I look for things like pcie 2.0 support, 9800gtx getting better with drivers(>_>), possibly a board supporting ddr2 and ddr3...I don't know I'm not in the loop even though I understand how useless dd3 is atm. I need a system where the components that make up the heart of the system are the most important in regards to newer compatibility with future tech (motherboard, psu, ram maybe).


tiraides said:
The 8800GTS is actually as good as the 9800GTX yet costs a bit less. The 8800GTX is a better gaming option, now that it's come down in price, but I prefer the 8800GTS/9800GTX's onboard video encoding/decoding features (which offload the work from the CPU). Consider the EVGA brand; in addition to its step up policy, should you decide to get one of the newer cards coming next month, it has arguably the best customer service/warranty around.

Get the E8400 if this machine is more for gaming or the Q9450 if you consider yourself more of a multitasker. If you're trying to save some money, the Q6600 is a good alternative to the Q9450 as well as a pretty good overclocker. You don't need any special "high performance" RAM, so buy a DDR2 800 kit if you get the Q6600 or if you're keeping everything at stock speeds/settings, or the DDR2 1000 if you're planning on overclocking the E8400/Q9450. I believe that NewEgg has DDR2 800 and DDR2 1000 kits from G.Skill for around the same price. (You can often find a DDR2 1000 kit for less than you would a DDR2 1066 kit).

You know, if you're not that choosy regarding cases, you could settle for the same Sonata III case/PSU combo that you used for your coworker. Buy.com has a nice deal on it: $110 with free shipping. (And yes, it will fit the 9800GTX, which is the same approximate size as the 8800GTS.)

It is more of a gaming machine... but who knows what will happen with quad core compatibility with games in a few years... which is why I'm torn between the 8400 and 9450. Like I mentioned I went with 45nm penryn because of stability + lower voltage. This system isn't the one rare civic that actually has something under the hood being hidden by all that guady plastic power showoff bull. I want it to be a simple and sleek shelby cobra sleeper that is eloquent like the past but advanced for the future inside :D

I'm not sure on the sonata as it seems cramped and would suffer heat problems in my room. Believe me when I tell you how much hotter it will be in here than a normal house. New Jersey summers are humid and hot. add 10-15 to that. I'm still undecided on the videocard and will take more thinking. I did consider SLI; not for the fact that it helps with high resolutions I won't use but for in the future when I have to run new games in lower res + lower settings that sli could help compensate.. especially if new cards use something other than pci-e in the future but two sli pci-e cards of t he best could keep the system going longer.

Oh well, I really don't think I want to deal with nvidia motherboards like last generation. Always so many stability issues. Also Asus is going to most likely not be in my motherboard choices with their non existant support and terrible motherboard connection layouts. While I love nforcershq I want to deal with more stable choices (oh how epox and abit rocked nforce2. They fixed that kingston hyperx spd issue in the bios while asus said "f you", buy our new northbridge 400 ultra E models instead to correct it.

As you can see I ramble on so....

Need more input Stephanie! More input!
 
Need more input Stephanie! More input!

I'm sorry; allow me to explain myself a bit further... :rolleyes:

Nehalem will make all Socket 775 processors and boards (as well as DDR2 RAM) obsolete within a year or so (though the mainstream parts won't arrive until around Q1 2009), so your upgrading path (outside of the video card) will be limited.

But with the monitor resolution you are using -- 1680x1050 -- you don't need a multi-card solution like SLI or CrossFire. That's why I'm recommending the P35 boards to you. They're just as stable as the CrossFire-supporting X38/X48 yet cost much less.

Reread my earlier point about the RAM; with DDR2 1000 RAM, you could reach the same approximate threshold with either 45nm chip without spending all of the extra money for DDR2 1066 RAM. DDR3 is a waste because it doesn't offer much of a performance increase (if any at all) for its price premium. By the time it does, Nehalem will be more mainstream.

PCI Express 2.0 is backwards compatible with PCIe 1.1 (x16) slots, and none of the cards out now fully saturates the PCIe 1.1 bus. (By the time they do, you would be building a new system anyways.)

You can go to the Intel Processors forum and read all about the dual-core vs. quad-core arguments, but I've explained the main point already. That, along with the choice of case, is largely a subjective matter -- it's all up to you.
 
El tiraides kick your ass. El tiraides kick your face... El tiraides kick your balls INTO OU-TER SPAAAAAAACE!

in other words, listen to tiraides. ;)
 
ehI'd like case suggestions that would hold large videocards too. I'd prefer something without the bling bling lights and guady plastic shape designs(non design doors are okay). It needs functionality mostly with 120mm or larger fans(a few at most) + case/fan filtering, vibration dampening drivebays hopefully, maybe removable or sideways drive trays...window would be nice but not necessary. No Jet Engines!!! Something very simple and elegant that doesn't look like a lian li midtower munchkin (though midtowers are fine if they fit everything). There was this awesome silver metal coolermaster I saw months go but I lost the link(can't find it on newegg).

An Antec P182 sounds like the perfect case for you. You'll have to remove the middle HDD bay if you want to use really long video cards such as an 8800GTX, 8800Ultra, or a 9800GTX. Cooler Master Stacker/Cosmos cases are nice too.
 
Another "listen to tiraides" vote. Otherwise, I'll come back here and tell you the exact same thing using different words... as many times as I have to.
 
Thanks for all of the help. I'm looking at the cosmos and some of the newer lian li cases. The only thing that bothers me about the new cosmos s is what they left out for the price; reset button, plastic bars for front bays, little to no sound/vibration dampening which is a downgrade from the last cosmos, missing several fan filters...least the harddrive bay is nicer now. Some other things too :(

One question I have about SLi though! I know it's used primarily to be able to game at higher resolutions (1920x1080, 1900x1200 etc, 30 in 2056+) at reasonable speeds. I'm guessing the reason it doesn't help at lower resolutions is because the single card solution can power through it making it not worth the money.

So... when playing new games 3-5 years from now will that SLi help you with having higher settings being able to stay turned up when playing at the lower resolutions(1280, 1680x1050)? Since the games of next gen will hopefully be more demanding? Forgive me as I don't really know how sli achieves what it does :) I'm still prob going 99% single card.. then upgrading the card in 3 years. Who knows I might end up with a better monitor later on but i'll worry about that when I upgrade in the future :) Guess that is what i get for buying at the end of the lga775 lifecycle. The wolfedale seems like it would be better in games with the faster speed but lots of reviews(here and guru3d) show the q9450 edging it out in games even though lowly phenoms can mostly keep up in games still even with the priciest of intel cpu's at higher res. I still have a feeling quad's will pull ahead in the coming years in gaming.

Cutting down on the board and going single card + ddr800/1000 will give me more money for a sweet case.

I was checking out the antec 900 and 1200 ....:eek: what horridly ugly gaudy pieces they are :mad:
 
An Antec P182 sounds like the perfect case for you. You'll have to remove the middle HDD bay if you want to use really long video cards such as an 8800GTX, 8800Ultra, or a 9800GTX. Cooler Master Stacker/Cosmos cases are nice too.

second the Antec, or the P190, for something beefier.
 
Do /not/ think of SLI as an upgrade path -- it is an all or nothing, immediate or not at all kind of thing. You will be much better served selling whatever single card you get now and buying a much faster single card in a year or two than getting two cards for SLI now. /Much/ better off. Do not even consider SLI at your resolution.

Also, SLI motherboard mean Nvidia chipset motherboards, which generally speaking run hotter and are less stable / reliable than Intel chipset based boards. A P35 or P45 based board is ideal for your intended usage. An X38 / X48 is a total waste as you will not make use of the full bandwidth CrossfireX support. CrossfireX is just like SLI -- it's a horrible upgrade path. All or nothing.
 
Back
Top