dondan
[H]ard|Gawd
- Joined
- Apr 15, 2013
- Messages
- 1,751
@QuantimBraced:
Bigger cases like the M1 or other LianLi cases, have the space to use vertical female clip holder on the vertical sides and horizontal female clip holder on vertical sides. In an vertical clip holder the clip has 1-2mm space to moving up and down and in an horizontal clip holder 1-2mm left and right. The A4-SFX has only vertical clip holder becuase there is no space for horizontal ones. I attached the bottom screws so that nobody can say that the A4-SFX will offer a bad clearance quality. And the sidepanels will finish 100% with the topside.
Acrylic sidepanles will be very expansive, because every of the thousand holes must be drilled seperat. For metal you can bunch them out.
Bigger cases like the M1 or other LianLi cases, have the space to use vertical female clip holder on the vertical sides and horizontal female clip holder on vertical sides. In an vertical clip holder the clip has 1-2mm space to moving up and down and in an horizontal clip holder 1-2mm left and right. The A4-SFX has only vertical clip holder becuase there is no space for horizontal ones. I attached the bottom screws so that nobody can say that the A4-SFX will offer a bad clearance quality. And the sidepanels will finish 100% with the topside.
Acrylic sidepanles will be very expansive, because every of the thousand holes must be drilled seperat. For metal you can bunch them out.