x2 bios ECS and overclocking bios a754

JSF35rhino

[H]ard|Gawd
Joined
May 25, 2005
Messages
1,253
new bios out-- i flashed this bios to my ECS a754 1.0 nf4 mb-- it retains most of the previous bios but it adds support for cpu-FSB up to 400mhz !

previously my ECS has been held back by only having 250fsb.

and lastly the A-939 mb has a new x2 bios --make sure you have the right MB as there are several 939's for the ecs- :eek: http://www.ecs.com.tw/ECSWeb/Downloads/ProductsDetail_Download.aspx?DetailID=501&DetailName=BIOS&DetailDesc=NFORCE4-A754(1.0)&MenuID=35&LanID=9
ECS Web Site 1http://www.ecs.com.tw/ECSWeb/Downloads/ProductsDetail_Download.aspx?DetailID=493&DetailName=BIOS&DetailDesc=NFORCE4-A939(1.0)&MenuID=35&LanID=9
ECS Web Site2

the bios to get for the a-754 rev 1.0 is a-75410H
 

JSF35rhino

[H]ard|Gawd
Joined
May 25, 2005
Messages
1,253
ok bios a754-10h has adjustments for fsb to 400fsb--however and above 292fsb don't seem to work.

so it still needs some bios work --but 292 give a bit more room-- if you had a 10x sempron you could push the limit.

my 8x sempron is running @ 292fsb stable 2360mhz--i think i can pull this thing above 300fsb if the bios would let it get there--lol :cool:http://www.ecs.com.tw/ECSWeb/Downloads/ProductsDetail_Download.aspx?DetailID=493&DetailName=BIOS&DetailDesc=NFORCE4-A939(1.0)&MenuID=35&LanID=9
ECS Web Site2http://www.ecs.com.tw/ECSWeb/Downloads/ProductsDetail_Download.aspx?DetailID=501&DetailName=BIOS&DetailDesc=NFORCE4-A754(1.0)&MenuID=35&LanID=9
ECS Web Site 1
 
Top