JediFonger
2[H]4U
- Joined
- Jan 2, 2003
- Messages
- 2,777
i've searched through the archives and can't find related posts. so please excuse my super noobness!
in my research i think this capability is beyond this switch. this is a "limited l3" switch. i just wanted to verify this with you pros. i'm running this on my home lab.
the topology is this:
Comcast WAN->Sonicwall tz190 (this does *NOT* do VLANs, just a FYI, basic cookie cutter router/firewall)
From the sonicwall it goes to Cisco2960 running ios 15se7.
i do not have any other switches/routers on the network at all.
gateway is the typical 192.168.1.1.
on the Cisco2960 everything on vlan1 (management) can hit internet since it's on the same subnet as the rest of the network.
vlan2=192.168.2.x
vlan3=192.168.3.x
vlan4=192.168.4.x
i want vlan2 through vlan4 to access internet. can network devices on vlan2 through vlan4 hit the internet with inter-vlan routing?
ip routing is already enabled. i'm able to ping vlan2 through vlan4, but have a hard time getting vlan2 through vlan4 to ping vlan1.
again i know this is a super limited l3 switch and not the 3xxx series.
from what i've read this switch is very limited and would require another separate router to pass gw traffic from 192.168.1.1 to the other vlan2 through vlan4. just using this 2960 switch alone it is not possible.
the exact model# is WS-C2960-24TT-L
in my research i think this capability is beyond this switch. this is a "limited l3" switch. i just wanted to verify this with you pros. i'm running this on my home lab.
the topology is this:
Comcast WAN->Sonicwall tz190 (this does *NOT* do VLANs, just a FYI, basic cookie cutter router/firewall)
From the sonicwall it goes to Cisco2960 running ios 15se7.
i do not have any other switches/routers on the network at all.
gateway is the typical 192.168.1.1.
on the Cisco2960 everything on vlan1 (management) can hit internet since it's on the same subnet as the rest of the network.
vlan2=192.168.2.x
vlan3=192.168.3.x
vlan4=192.168.4.x
i want vlan2 through vlan4 to access internet. can network devices on vlan2 through vlan4 hit the internet with inter-vlan routing?
ip routing is already enabled. i'm able to ping vlan2 through vlan4, but have a hard time getting vlan2 through vlan4 to ping vlan1.
again i know this is a super limited l3 switch and not the 3xxx series.
from what i've read this switch is very limited and would require another separate router to pass gw traffic from 192.168.1.1 to the other vlan2 through vlan4. just using this 2960 switch alone it is not possible.
the exact model# is WS-C2960-24TT-L