when running LinX or Prime it's lowering voltage...

[lukx]

'm using this settings for Oc'ing intel 3930K on Asus P9X79WS : http://www.youtube.com/watch?v=Kx2z07sFM2I
I have 4.6 GHz with 1.325 V but when running LinX or Prime it's dropping below 1.3 when looking at CPU-Z at full load. I guess this is why I might get stability issues even when pumping more voltage. When I stop test voltage is coming back to what I set in bios. Why it's happening?

 

[runs2far]

Vdroop, thats normal.

 

[LigTasm]

Increase your LLC setting to the second from the highest, on Asus boards it is usually "very high". This will keep the voltage from dropping so far.