JDBattleMC
n00b
- Joined
- Nov 15, 2010
- Messages
- 29
I have a water cooled i7 920 2.67ghz which I am currently OCing at 3.6ghz.
Running Prime95 on it, Im at 73-75c at load which is EXTREMELY high.
I recently (As of today) switched motherboards from an Asus Rampage II Gene, to an EVGA X58 SLI 3.
While switching my waterblock, I just left the thermal paste on the block and processor and re-attached the water block.
Could the lack of reapplication have anything to do with the incredibly high temps?
I'm at 1.33v on the CPU, with the rest of the settings stock.
It's set at 174.42x 21.0 for the settings.
Is there anything else I should check for why its running so hot? I'd think with a water cooled system that I should be never above 50c at load.
Running Prime95 on it, Im at 73-75c at load which is EXTREMELY high.
I recently (As of today) switched motherboards from an Asus Rampage II Gene, to an EVGA X58 SLI 3.
While switching my waterblock, I just left the thermal paste on the block and processor and re-attached the water block.
Could the lack of reapplication have anything to do with the incredibly high temps?
I'm at 1.33v on the CPU, with the rest of the settings stock.
It's set at 174.42x 21.0 for the settings.
Is there anything else I should check for why its running so hot? I'd think with a water cooled system that I should be never above 50c at load.