So here is the deal. I have a Dell Poweredge 1850 with 4 NICs in it. This connects to a dell powerconnect 5324 switch. One nic is on its own vswitch which is on VLAN 2 on the powerconnect for DMZ traffic. The other 3 nics are own their own vswitch which is on VLAN 1 of the powerconnect.
Now normally I would expect to just go into the web interface of the powerconnect select the 3 ports I want to team, assign them to the team, hit apply, wait about 30 seconds and be done. However for whatever reason ESXi just will not team the NICs and I can't figure out why.
Any ideas?
Now normally I would expect to just go into the web interface of the powerconnect select the 3 ports I want to team, assign them to the team, hit apply, wait about 30 seconds and be done. However for whatever reason ESXi just will not team the NICs and I can't figure out why.
Any ideas?