Vertically Mount Two 2.5" SAS Hard Drives in a Dual 5.25 Bay?

[dejacky]

Does anyone know where I can find a mount or how I can fit these Dual 2.5" SAS hard drives (15mm thick) on the side of this Dual 5.25 bay area? It would be great if I could retain the hot swap feature so I could remove/insert the drives from the front of the case. I scoured the web, but didn't see any dual mounts that were fit vertically as in these pics:

For some odd reason the pictures show in preview, but not in this post. So, I'm uploading the original images as attachments.

 

[Guarana [BAWLS]]

https://www.bhphotovideo.com/bnh/co...&c3api=1876,{creative},{keyword}&A=details&Q=

not vertical, but....

 

[Guarana [BAWLS]]

http://www.nextwarehouse.com/item/?1974909_g10e

That should do it, plus for another stack of drives....

 

[dejacky]

I appreciate your replies, but the pictures I posted in the thread shows those racks won't fit because there is a water pump in the right side of that dual 5.25" bay. Can you see the pictures?

 

[Guarana [BAWLS]]

Oh, in that case you're screwed. You won't find that off the shelf.

 

[sweets3450]

this is going to be an unpopular opinion but with enough tape, paper clips (make sure they're secure), and rubber bands you can do lots of tricky fixes in old cases.

 

[Honeg0d]

get something like this https://www.newegg.com/Product/Product.aspx?Item=N82E16817994148 cut the excess away and mount the hot plug bit where you need it.
something to guide the drives and hold them, possibly involving rubber bands and paperclips, should be fairly simple.

 

[Guarana [BAWLS]]

Foamy Tape is always the best answer.

 

[mrmagoo_83]

http://www.budgetpc.com.au/computer...s/pci25-1s-2-5-inch-hdd-ssd-rack-for-pci-slot

Might could mod this a little.

 

[Logan321]

That pump location basically causes your problem. If you can fit a 3.5" drive sideways, you could install one of these, or another similar product: https://www.amazon.com/StarTech-com-Drive-Trayless-Mobile-Backplane/dp/B001CYZC38/ref=sr_1_10?ie=UTF8&qid=1497572951&sr=8-10&keywords=2+2.5"+hdd+in+3.5"+bay

2x 5.25" bays are only 3.25" tall, so you'll have to hack out another .25" to make it fit, but it's really your only option in that space.