Updated2: OC Edge-case Adventures :-) R5 2600 @ 4.200Ghz ~ 1.375v F.L.F!

Discussion in 'Overclocking & Cooling' started by illusio13, Feb 22, 2019.

  1. illusio13

    illusio13 n00b

    Messages:
    48
    Joined:
    Feb 20, 2019
    Updated: @ bottom of post!

    SO.........; have booted into desktop @ 4.3Ghz ~ 1.419v ( not stable in CB15) :) and passed a few benchmarks @ 1.462v F.L.F:-(( Personally dont think my chip is that good; my msi x370 gpc is not bad :))

    Have included jpg ( 300dpi ) scans of the Salient 10 pages from my OC edge-case adventures ...............; For those of you who like real-world data points( to help inform your own OC'ing :) )...; enjoy :

    Matisse @ the same TDP...............; hahahahahahahahahaha; what a blast thats going to be!!! :) :)

    upload_2019-2-22_23-47-24.jpeg


    upload_2019-2-22_23-47-58.jpeg


    upload_2019-2-22_23-48-31.jpeg


    upload_2019-2-22_23-49-2.jpeg


    upload_2019-2-22_23-49-51.jpeg


    upload_2019-2-22_23-50-27.jpeg


    upload_2019-2-22_23-50-55.jpeg


    upload_2019-2-22_23-51-39.jpeg


    upload_2019-2-22_23-52-15.jpeg


    upload_2019-2-22_23-52-56.jpeg


    Their are soooooooo many more pages dudes : -); these most important to me!!!

    Rekon the 4.5Ghz projection ( page1 )........; may have some CBR15 + Gaming stable,,, edge-cases; maybe 0.014~0.044mV ....................................................below that pg1 projection!!!!!!!



    Matisse @ the same TDP dudes : what a blast :)

    Apologies if formatting is " from hell "; can any mod put the jpg as links please, if easier to read on page / open?

    Edit : spelling!

    UPDATE : Won Sillicon Lottery = .........., maybe! :)
    Currently @ 43.25Ghz @ F.L.F of 1.450v GrrrrrGrrrrrrrrrrrrrrr :-( NOTE: NOT P95 / CBR15 / 3DMARK load stable...........; Valley, Heaven and SuperPos all OK ( 1.456 v- 1.462v F.L.F ), Tomb Raider ( Reboot 1 ) passed benchmark.

    Not bad dudes, fancy nudging another ............... maybe 0.012-.0.044v off this, but problem is ; can i load into desktop?

    @ 4.4Ghz ( LOL ) was able to load to welcome screen; but halt-error. @ Max MBoard V ( 1.550V EKKkkk ! ) still cannot get into desktop,; not always but mostly halt with ssd error!

    The 4.5Ghz projection :), assumed a linear V/F Max curve; use to find edge-case senarios above! :)

    So, 4.325Ghz..............almost ( 93% ) Gaming Stable! Not bad dudes, not bad :)

    UPDATE 2 : Getting boost @ 4215.6 ..........; after running CBR15 single core pass, but not multi-core ( not before @ 4.200 ~ 1.375v F.L.F ! ) FSB @ 100.4 - this the Maximum XFR2 for non-x Pinnicale Ridge?

    Sure i have CPB + PBO disabled in bios.........., Ehh :)
     
    Last edited: Feb 26, 2019