Unoperational After Power Supply, Video Card Swap

NOTD665

Gawd
Joined
May 20, 2002
Messages
1,016
Hey guys,
This afternoon I upgraded my power supply from an older Antec one to a Corsair TX750W and my video card from an BBA X850XT to an Asus EN9800GTX+.

None of my other hardware changed, but I did take everything out to clean/dust.Nothing seemed to take an damage coming out or going back in, but now I'm getting problems when I try to boot.

-Athlon 64
-Abit AT8
-Kingston HyperX 4x 1GB
-Asus EN9800GTX+

I get an error code of 'C1' on the board, which according to the motherboard manual corresponds to "Detect Memory." The systems hangs there without POSTing.

I tried pulling everything except the memory and CPU, same problem. Just the CPU, same problem. Working memory from another computer, same problem.

Any ideas?
 
Dos the system work just fine with the old video card?
 
Without even knowing what PSU you had, I would be willing to put money down that it can handle that GPU you upgraded to . Try putting the old PSU back in and use the 2xmolex to 1pci-e x6 for your power.
 
Back
Top