Having an issue with my UAP Pro, im only getting ~1/2 the speeds I should. Network transfer from my server to my Mac Book Air (As well as a desktop with a Intel 7260AC Wifi card) are right around ~10MB/s, to my understanding I should be able to get ~18-20MB/s. Issue is not on the wired network, machines connected via hardwire only are getting ~120 MB/s from the server on the same file.
My setup:
Modem - Arris 1762G (I have a Surfboard SB6141 on the way, not an issue in this though)
Router - Unifi USG
Switch - 250w Unifi 24port POE Switch
AP - Unifi UAP Pro
What i have tried:
- Every setting imaginable on the wifi spectrum, 5 GHz only, 2.4 Only, HT20, HT40, forcing WPA2 only. Any ideas on it being a weird setting let me know.
- Both a UTP and STP Cable
- Tested cables to know they did true gbe speeds from desktop to server
- With and without the POE injector
- when using with, POE on the switch was disabled for the port.
This is all being run on controller version 4.6.6. Initially on a Windows 10 host, migrated to my server today (Server 2012 R2 is the host os for the controller). Issue persists.
To add, I have the issue even with 2' from the AP with a clear line of sight, same speeds (Closer to sub 9 MB/s) when the UAP is in a closet with a single drywall wall inbetween the Macbook Air and the UAP.
Am I crazy to think I should get more than 10/100 speeds out of a UAP that has a gigabit link (As confirmed by onboard indicator LED's, and in the controller).
Im at the end fo my knowledge for networking, any ideas?
Thanks
Also: I have checked banks, I am in the empty bands (5GHz actually has no one else on it but my AP and my mac book)
My setup:
Modem - Arris 1762G (I have a Surfboard SB6141 on the way, not an issue in this though)
Router - Unifi USG
Switch - 250w Unifi 24port POE Switch
AP - Unifi UAP Pro
What i have tried:
- Every setting imaginable on the wifi spectrum, 5 GHz only, 2.4 Only, HT20, HT40, forcing WPA2 only. Any ideas on it being a weird setting let me know.
- Both a UTP and STP Cable
- Tested cables to know they did true gbe speeds from desktop to server
- With and without the POE injector
- when using with, POE on the switch was disabled for the port.
This is all being run on controller version 4.6.6. Initially on a Windows 10 host, migrated to my server today (Server 2012 R2 is the host os for the controller). Issue persists.
To add, I have the issue even with 2' from the AP with a clear line of sight, same speeds (Closer to sub 9 MB/s) when the UAP is in a closet with a single drywall wall inbetween the Macbook Air and the UAP.
Am I crazy to think I should get more than 10/100 speeds out of a UAP that has a gigabit link (As confirmed by onboard indicator LED's, and in the controller).
Im at the end fo my knowledge for networking, any ideas?
Thanks
Also: I have checked banks, I am in the empty bands (5GHz actually has no one else on it but my AP and my mac book)