morbid_looney
n00b
- Joined
- Feb 29, 2012
- Messages
- 36
Im trying to flash my new 1015 to IT mode.
I made a dos usb stick with the data on it.
I followed the tutorials as far as the commands go but I have a problem when is type the first command:
dos log:
Screen Picture:
then it hangs and I cant fill in any more commands
I've tried different usb sticks and I tried it in 2 systems but no luck so far.
I've also been googeling for hours no but I couldn't find I fix so I thought id just ask here.
I used this dos usb method: http://www.sevenforums.com/tutorials/46707-ms-dos-bootable-flash-drive-create.html
and the firmware is located in the SAS2008 folder on the drive.
(im guessing its a dos settings thing but I don't know shit about dos )
I made a dos usb stick with the data on it.
I followed the tutorials as far as the commands go but I have a problem when is type the first command:
dos log:
Code:
C:\>cd c:\sas2008
C:\SAS2008>megarec -writesbr 0 sbrempty.bin
DOS/31A -- Protected Mode Run-time Version 7.35
Copyright (c) Suupernar Systems, Ltd. 1996-2005
Screen Picture:
then it hangs and I cant fill in any more commands
I've tried different usb sticks and I tried it in 2 systems but no luck so far.
I've also been googeling for hours no but I couldn't find I fix so I thought id just ask here.
I used this dos usb method: http://www.sevenforums.com/tutorials/46707-ms-dos-bootable-flash-drive-create.html
and the firmware is located in the SAS2008 folder on the drive.
(im guessing its a dos settings thing but I don't know shit about dos )
Last edited: