HI All,
I have an HP switch that is having an issue.
We have a connection that is fiber being converted to CAT 5 and connected to our port. We have 3 vlan's on that port (1913,1914,1943).
I have another port which is is tagged on vlan 1943
that host connected on port 2/39 is not able to access a host on the other side of 2/37
the odd part? the port on 2/37 looks like its not putting anything on the wire (reference below in the Drops TX:
any suggestions?
I have an HP switch that is having an issue.
We have a connection that is fiber being converted to CAT 5 and connected to our port. We have 3 vlan's on that port (1913,1914,1943).
Code:
nterface 2/37
flow-control
tagged vlan 1913-1914,1943
untagged vlan 999
exit
I have another port which is is tagged on vlan 1943
Code:
interface 2/39
tagged vlan 1913
untagged vlan 999
exit
that host connected on port 2/39 is not able to access a host on the other side of 2/37
the odd part? the port on 2/37 looks like its not putting anything on the wire (reference below in the Drops TX:
Code:
HP-Stack-2920# sh int 2/37
Status and Counters - Port Counters for port 2/37
Name :
MAC Address : 6cc217-0d8a1b
Link Status : Up
Port Enabled : Yes
Totals (Since boot or last clear) :
Bytes Rx : 8,653 Bytes Tx : 0
Unicast Rx : 0 Unicast Tx : 0
Bcast/Mcast Rx : 127 Bcast/Mcast Tx : 0
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Tx : 730
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 0 Deferred Tx : 0
Others (Since boot or last clear) :
Discard Rx : 0 Out Queue Len : 0
Unknown Protos : 0
Rates (5 minute weighted average) :
Total Rx (bps) : 0 Total Tx (bps) : 0
Unicast Rx (Pkts/sec) : 0 Unicast Tx (Pkts/sec) : 0
B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 0
Utilization Rx : 0 % Utilization Tx : 0 %
any suggestions?