The Post Pics Of Your Rig Thread! - ABSOLUTELY NO COMMENTS

Status
Not open for further replies.
IMG_3203.jpg
 
Thanks! I'll take some more detailed ones tonight.

The only mod I've done to this case is a 120mm exhaust up top. Later I plan to do two low-RPM 140mm fans up there.

I also have a black metal plate on the other side of the HDD cage to block view of the wires. It's hard to see it in the pictures I have now though.

IMG_3210.jpg


Edit: More revealing shots.

IMG_3222.jpg
 
Last edited:
At first I was looking for the power supply, but is that what the black PCB is above the motherboard?
 
does that ion board get too hot? i am thinking of upgrading from ym zotac one which has a fan
 
At first I was looking for the power supply, but is that what the black PCB is above the motherboard?

yea, it's pretty easy to remove. i had to literally disassemble the case to get the mobo in.

does that ion board get too hot? i am thinking of upgrading from ym zotac one which has a fan

no way, that cpu/case fan keeps the whole thing pretty cool. i haven't gotten around to using real temp to get actual an measurement. plus there is no I/O shield on the back.
 
got the same case but a zotac ion board which has a fan some times we can hear might swap it for that fanless one then
 
thats a lot of lights! what gpu heat sink are you using? also, is that case pretty loud with all those fans or are they on super low speed?

The heatsink is the NH-D14, just swapped out the fans. The Apollish fans are actually pretty quiet, <20db. I have 7v resistors on the zotac fans on my heatsink, and the 200mm megaflows are pretty quiet <17db as well.
 
The heatsink is the NH-D14, just swapped out the fans. The Apollish fans are actually pretty quiet, <20db. I have 7v resistors on the zotac fans on my heatsink, and the 200mm megaflows are pretty quiet <17db as well.

hm never heard of apollish. sounds fairly quiet then. and i was asking about the gpu heat sink, as it definitely doesnt look stock. :) is it the gelid icy vision one?
 
hm never heard of apollish. sounds fairly quiet then. and i was asking about the gpu heat sink, as it definitely doesnt look stock. :) is it the gelid icy vision one?

Yea, they are the new line by Enermax, and relatively hard to find at a decent price, I'd say. I had to check Frys' stock everyday to get them. Yes the GPU heatsink is an icy vision. Ordered some third party clips and attached aftermarket fans to it. :cool:
 
dsc02688.jpg

dsc02689.jpg

dsc02691.jpg


Intel Q9550 @ 3.8Ghz
eVGA nForce 780i
GTX 460 1GB Sli 850/2000Mhz
8Gb DDR2 800Mhz
Antec 300 Mod
Antec NeoHe 550w
2TB
Noctua NH-D14 + x4 120mm

Need to buy better powersuply, because not all fans are getting power. Sorry about bad quality pictures.

Hope you enjoy!

p.s i will do better cable management when i get new psu.
 
New System Specs

I7 980x
12GB Corsair Dominator GT 1866 (My change to Super Talent 2133 cl8)
Asus Rampage III Extreme
3x Evga GTX580's
3x Intel X25m g2 160's raid 0
laptron fc2
Creative Fatality

Cpu, MB and GPU's EK blocks
3x GTX 480'd 3x GTX 360's
18 Noiseblocker HS fans
Dual MCP655
Ek Serial Sli setup
BP Tops and covers
Frozen Q Res

P1000628.jpg


P1000627.jpg


P1000626.jpg


P1000625.jpg


P1000624.jpg


P1000623.jpg


P1000622.jpg


P1000621.jpg


P1000620.jpg


P1000619.jpg


P1000618.jpg


P1000617.jpg


P1000616.jpg


P1000615.jpg


P1000614.jpg
 
New System Specs

I7 980x
12GB Corsair Dominator GT 1866 (My change to Super Talent 2133 cl8)
Asus Rampage III Extreme
3x Evga GTX580's
3x Intel X25m g2 160's raid 0
laptron fc2
Creative Fatality

Cpu, MB and GPU's EK blocks
3x GTX 480'd 3x GTX 360's
18 Noiseblocker HS fans
Dual MCP655
Ek Serial Sli setup
BP Tops and covers
Frozen Q Res

Impressive! That's a monster or a rig! :cool:
 
here is my old Lian Li midtower that I modified to fit a 120x2 and a 120x1 rads. it is also my first time water cooling. please critique :)

DSC_0029.jpg


DSC_0017.jpg


DSC_0008.jpg

Looks badass! That is the reservoir and pump I want! Can you link me to it? I get confused about this watercooling stuff too easy!
 
Great looking rig! Impressive OC! How are you liking the Corsair Vengeance memory and Sandy Bridge?
 
Specs in sig
/IMG_5656.JPG[/IMG]

Nice. If you want to make the loop look slicker and cleaner, use a SLI fitting instead of a piece of long tubing between the cards. Or you can use compression fittings and a small piece of tubing literally between the cards.
 
Old System
CPU: Intel Core2 Quad Q6600 G0 2.4 GHz w/ 1066 MHz FSB- Cool master V8 CPU Cooler/Asus P5Q Turbo Motherboard/Corsair XMS2 4GB (2x2GB) DDR2 1066MHz CL5 PC2-8500/OCZ XTC Platinum OCZ2P10002G 4GB (2x2GB/OCZ ModXStream Pro 700W Power Supply PSU/LG DVD/CD writer/Galaxy Geforce 9800 GX2 1GB/Western Digital 150 Gig Raptor Hard Drive Sata (10.000) RPM/Western Digital 250 Gig Hard Drive Sata/Western Digital 1000 Gig Hard Drive Sata/Two 22 inch Lcds 1 x Lg W2242TQ & 1 x Vision Quest





New system specs in sig




 
Last edited:
ill admit im not the best photographer and these were on my el cheapo camera, a little mustec 5200, and im sort of a noob about picture posting here goes nothing:







lol i hope i didnt fail the embedding
 
Just upgraded my PC.

Went from a e8400 on an EVGA 780i to a i7 970 on an Asus Rampage III Formula. The rest of the specs are in my signature.

Went from this:

IMG_0883.JPG


To:

IMG_1523.JPG


IMG_1525.JPG


IMG_1527.JPG


More images in my WebAlbum if you care to look.
 
A commissioned oak and aluminum case.

  • Form factor: HPTX (EVGA's SR-2)
  • Dimensions: 46 x 27 x 35 inches (HxWxD)
  • Weight: 161 pounds
  • Materials: Solid red oak and oak veneer plywood, .10-inch aluminum sheet, .125-inch angle, all stainless steel fasteners
  • Finish: black wood stain with wipe-on polyurethane, black powder coating
  • Internal drive bays: 37 x 5.25-inch
  • PSUs: 2x
  • Two custom radiator mounting brackets to hold 4 x 140x4 radiators
  • 140mm case fans

SR2Case7.jpg


SR2Case1.jpg


SR2Case2.jpg


SR2Case3.jpg


SR2Case8.jpg


SR2Case9.jpg


SR2Case4.jpg


SR2CaseBuilder.jpg

Phenomenal. So what is going in this thing?
 
You've been here 10 years, yet you just quoted all of his pictures and posted a comment in a no comments thread. Guys, look at the title.


edit: Yeah I know i'm commenting too.
 
While the quoting was dumb, the no comments thing is absurd, which is why no one adheres to it. We are here as a community to share our accomplishments and hardware; it is ludicrous to imagine that "no comments" will be made along the way.
 
Status
Not open for further replies.
Back
Top