Specs in sig. The system will post but wont boot windows at 3.6ghz, about a 255FSB i believe. Is it dangerous to put the voltage past 1.6 on these p4's for stability, or should i give it a go? I think i've narrowed it down to the cpu and not the ram . agp/pci is locked at 66/33.
btw, at idle at the speed in sig are approx. 43 C and at full load about 55 C... these are estimates using mbm as the ic7 motherboard with the latest bios flash, which is supposed to fix the incorrect temperature reporting to be off by about 5 degrees.
btw, at idle at the speed in sig are approx. 43 C and at full load about 55 C... these are estimates using mbm as the ic7 motherboard with the latest bios flash, which is supposed to fix the incorrect temperature reporting to be off by about 5 degrees.