Spencer's SN45G (56k go hug a tree)

S

spencers

Gawd
Joined
Aug 16, 2002
Messages
965
Hey there, here's my SN45G (*updated Desk shot*)

I've done the usual mods--
Rear ICE grille dremeled out
Blowhole mod
Stealthed drives
Picture behind clear face

Specs:
2100+ at 2.1ghz
512mb PC3200 Twinmos BH-5
Western Digital 120GB SE HD 8mb
Radeon 9800 Pro
Samsung SyncMaster 710T LCD
Liteon DVD/CD-RW Combo Drive
Klipsch 4.1
Logitech MX700 Mouse
Logitech Elite Keyboard

BEFORE: With the 9700 Pro, stealthed drives, and M3 cockpit
DSC01850.jpg


Now: The whole Shuttle shot, with blowhole
DSC01940.jpg


Inside, with the new 9800 Pro
DSC01944.jpg


Rear ICE grill cut
DSC01949.jpg


UPDATED Desk shot!
deskLCD.jpg


Thanks for looking!
 
Nice one! I have an SN45G too and I'm planning to cut the restrictive fan guard out at the back and placing a 80-120mm converter with a alu 120fan at the back, should look quite nice. :)
 
spencers said:
Yay! Someone comments!

Thanks! Hope you have fun with your sn45
Click to expand...

I have actually, I cut the fan guard off last night and I somehow managed to destroy the sunon fan in the process. :(
Everthing worked out fine this morning though, seems like the cables got severed so I slapped a q-tek fan on for the time beeing.
Case temps went down with ~10c idle! :)
 
mange_ said:
I have actually, I cut the fan guard off last night and I somehow managed to destroy the sunon fan in the process. :(
Everthing worked out fine this morning though, seems like the cables got severed so I slapped a q-tek fan on for the time beeing.
Case temps went down with ~10c idle! :)
Click to expand...


You know it's best to strip down the Shuttle before you do any cutting!
 
spencers said:
You know it's best to strip down the Shuttle before you do any cutting!
Click to expand...

No shit Sherlock.. :D
The cables were cut when I mounted everything again. The edges where the cutting was done was, despite of me sanding it, very very sharp.. :(
 
I think I'm going to have to learn to stay away from SFF threads, they make me wish I had more money than I do. ;)

Very nice work. I love the BMW cover for the front panel. Did you make it yourself, or did you buy it?
 
I made the BMW picture myself.

Just printed it out with a high quality photo printer, cut it out, cut the holes out, and slapped it on.

My full system specs are:
2100+ at 2.1ghz
512mb PC3200 Twinmos BH-5
Western Digital 120GB SE HD 8mb
Radeon 9800 Pro
Samsung SyncMaster 710T LCD
Liteon DVD/CD-RW Combo Drive
Klipsch 4.1
Logitech MX700 Mouse
Logitech Elite Keyboard
 
Nice =)

I have a SN45GV2 and i also cutout the rear grill. It was a pain in the ass to take everything out though.
 
9mmx19 said:
Nice =)

I have a SN45GV2 and i also cutout the rear grill. It was a pain in the ass to take everything out though.
Click to expand...

Nah, putting it back in is a bitch!
 
You must log in or register to reply here.
Back
Top