Hello!
I have the following new setup:
I'm having troubles with high Read errors corrected by ECC counter in SMART.
Writing to hard drives gives no errors, but as soon as I start to read data from hard drives, counter goes crazy. I have brand new setup and I'm seeing this errors.
SMART output:
So far I have tested with these drives:
So far, HGST is working OK, but both Seagates produce errors.
Does anyone else has those drives in the system and could check their SMART stats?
Do you also see high values?
Could you paste your SMART values here?
Thanks, MAtej
I have the following new setup:
- server with LSI 9207 HBA firmware P19
- Supermicro 837E26-RJBOD1 28bay JBOD
I'm having troubles with high Read errors corrected by ECC counter in SMART.
Writing to hard drives gives no errors, but as soon as I start to read data from hard drives, counter goes crazy. I have brand new setup and I'm seeing this errors.
SMART output:
Code:
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 35 C
Drive Trip Temperature: 60 C
Manufactured in week 16 of year 2015
Specified cycle count over device lifetime: 10000
Accumulated start-stop cycles: 133
Specified load-unload count over device lifetime: 300000
Accumulated load-unload cycles: 133
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 122906373
Blocks received from initiator = 0
Blocks read from cache and sent to initiator = 128
Number of read and write commands whose size <= segment size = 65
Number of read and write commands whose size > segment size = 0
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 10.33
number of minutes until next internal SMART test = 46
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 171072857 0 0 171072857 0 32.863 0
write: 0 0 0 0 0 0.026 0
So far I have tested with these drives:
- Seagate Enterprise capacity 3.5 v4 4TB SAS3 -- ERRORS
- Seagate Constellation ES.3 ST4000NM0023 4 TB 3.5 SAS2 -- ERRORS
- HGST Ultrastar 7K4000 SAS2 4TB HUS724040ALS640 -- NO ERRORS
So far, HGST is working OK, but both Seagates produce errors.
Does anyone else has those drives in the system and could check their SMART stats?
Do you also see high values?
Could you paste your SMART values here?
Thanks, MAtej