Hi there peps, I m new here and would like to show my newest project
From Portugal to the world !
First of all would like to thanks to some friends!
X-Virus, SrJabardo, Bakoo, Labrego
Not yet finished
and far far away from beeing finished!
This is a Theme Project with my dream Case the Lian Li V2010
Hardware:
Caixa: - Lian Li V2010
Board: - Asus Sabertooth X58
CPU: - Intel I7 950 @ 4400Mhz
PSU: - Antec High Current Gamer 900W
Mem: - OCZ Platinum 1600 cl7 @ cl6
Storage: - 2x SSD Kigston 64Gb V+ @ Raid0 + 2x 1TB Samsung and WD
Graphic Card: - EVGA GTX570HD
Fans: - Nanoxia DX Series
WaterCooling:
Cpu Block: - EK HF Supreme Acetal
Rads: - Watercool Mo'Ra 3 LT (Passive)
Tubo - Feser 3/8 1/2
Elbows: Feser 45º Shiny / Some OEM
Fitings - Feser Barb 13mm
Controlador - Aquaero
Pump: - Swiftech MCP 655
Tube: Primochill Primoflex 10mm
Water Additive: Mayhelms Pre Mix Green
Reservoirs: DD Dual Bay
EK Basic 150
This is a project to work in as time and money alows.
How everything started
This is a really big case heheh
This was a render made by Labrego my best respect to him
And this was how i planned it before lol
After some time and a lot ideas the project got a different way!
http://www3.picturepush.com/photo/a/4381171/1024/Lian-Li/Santa-8.png
Some more hardware arrived!
The monster :D
[img]http://www1.picturepush.com/photo/a/4387974/1024/loja-news/PA200461.jpg
Some cables for the bling lol
And then I got really in love
Black Matte
and
Metalic Green
Me and my precisous
http://www1.picturepush.com/photo/a/4620404/img/pmt/DSC06168.jpg
Mounting her up
[img]http://www5.picturepush.com/photo/a/4620403/img/pmt/DSC06167.jpg
First some more Wc stuff !
Then a small change to the nzxt sleeve , the green power
then some hardware arrived!
Attention that everyting was done with a lot of time and this is a resume
Some hardware
Assembling it to the case
Was a bit afraid that the case would flid with the Mo'Ra, but all went well
Yes there isn t my graphic card
She didn t fit theres when i changed to the GTX570HD , she was launched in a good time
Now the alien arrives
Hand made my best Respect to Bakoo, aerograph master!
This acrilic is just a test, he will be there, but in a different way with cristal and black
This is one of the parts which aren t done yet!
Now!
Do you guys remember the 4front bays in green
A little transformation
Here are the sketches
Ahhh i loved it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
So i couldn t wait until I got it printed in a kind of ceramique! I think the correct name is SLS
look at the scratches at the skull ( in love )
Some more
This was done by purpose just to give it the maximum precision
the teeth will be a bit off the front bays and almost reach the start button!
And this is how it is now!
My great friend Bakoo is already thinking how to paint it and preparing the best theme for her
Next Steps!
Finish the skull
Finish the Top
Do the mechanic opener to the case! (yes the side panel will automaticaly open, by a button )
Once more my best respect and gratz for all my friend that are helping me with this case!
Bakoo, SrJabardo, X-Virus, Labrego, and everyone that helped me and gave me ideas!
My name is Santa.... OUT !
See you soon!
From Portugal to the world !
First of all would like to thanks to some friends!
X-Virus, SrJabardo, Bakoo, Labrego
Not yet finished
and far far away from beeing finished!
This is a Theme Project with my dream Case the Lian Li V2010
Hardware:
Caixa: - Lian Li V2010
Board: - Asus Sabertooth X58
CPU: - Intel I7 950 @ 4400Mhz
PSU: - Antec High Current Gamer 900W
Mem: - OCZ Platinum 1600 cl7 @ cl6
Storage: - 2x SSD Kigston 64Gb V+ @ Raid0 + 2x 1TB Samsung and WD
Graphic Card: - EVGA GTX570HD
Fans: - Nanoxia DX Series
WaterCooling:
Cpu Block: - EK HF Supreme Acetal
Rads: - Watercool Mo'Ra 3 LT (Passive)
Tubo - Feser 3/8 1/2
Elbows: Feser 45º Shiny / Some OEM
Fitings - Feser Barb 13mm
Controlador - Aquaero
Pump: - Swiftech MCP 655
Tube: Primochill Primoflex 10mm
Water Additive: Mayhelms Pre Mix Green
Reservoirs: DD Dual Bay
EK Basic 150
This is a project to work in as time and money alows.
How everything started
This is a really big case heheh
This was a render made by Labrego my best respect to him
And this was how i planned it before lol
After some time and a lot ideas the project got a different way!
http://www3.picturepush.com/photo/a/4381171/1024/Lian-Li/Santa-8.png
Some more hardware arrived!
The monster :D
[img]http://www1.picturepush.com/photo/a/4387974/1024/loja-news/PA200461.jpg
Some cables for the bling lol
And then I got really in love
Black Matte
and
Metalic Green
Me and my precisous
http://www1.picturepush.com/photo/a/4620404/img/pmt/DSC06168.jpg
Mounting her up
[img]http://www5.picturepush.com/photo/a/4620403/img/pmt/DSC06167.jpg
First some more Wc stuff !
Then a small change to the nzxt sleeve , the green power
then some hardware arrived!
Attention that everyting was done with a lot of time and this is a resume
Some hardware
Assembling it to the case
Was a bit afraid that the case would flid with the Mo'Ra, but all went well
Yes there isn t my graphic card
She didn t fit theres when i changed to the GTX570HD , she was launched in a good time
Now the alien arrives
Hand made my best Respect to Bakoo, aerograph master!
This acrilic is just a test, he will be there, but in a different way with cristal and black
This is one of the parts which aren t done yet!
Now!
Do you guys remember the 4front bays in green
A little transformation
Here are the sketches
Ahhh i loved it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
So i couldn t wait until I got it printed in a kind of ceramique! I think the correct name is SLS
look at the scratches at the skull ( in love )
Some more
This was done by purpose just to give it the maximum precision
the teeth will be a bit off the front bays and almost reach the start button!
And this is how it is now!
My great friend Bakoo is already thinking how to paint it and preparing the best theme for her
Next Steps!
Finish the skull
Finish the Top
Do the mechanic opener to the case! (yes the side panel will automaticaly open, by a button )
Once more my best respect and gratz for all my friend that are helping me with this case!
Bakoo, SrJabardo, X-Virus, Labrego, and everyone that helped me and gave me ideas!
My name is Santa.... OUT !
See you soon!
Last edited: