SPARTAN VI
[H]F Junkie
- Joined
- Jun 12, 2004
- Messages
- 8,760
Looking at replacing a H61 board with a Z68 board for my friend's Ivy Bridge rig. Stumbled upon this EVGA Z68 FTW board that's missing a pin in its LGA 1155 socket. I found a pin-out graphic, but without knowing the orientation of the diagram, it's difficult to tell.
Here's the board's LGA 1155 socket with the missing pin in the upper right corner:
And here's a pin-out diagram I found on the interwebs:
I'm hoping this is a VSS pin (35,AV) in the chart above? If so, then it's one of many many ground pins and the board should be fine? Most likely going in a different direction anyway, but want to keep this option on the table if it's indeed minor damage.
Thanks!
Here's the board's LGA 1155 socket with the missing pin in the upper right corner:
And here's a pin-out diagram I found on the interwebs:
I'm hoping this is a VSS pin (35,AV) in the chart above? If so, then it's one of many many ground pins and the board should be fine? Most likely going in a different direction anyway, but want to keep this option on the table if it's indeed minor damage.
Thanks!
Last edited: