Heliocentrical
2[H]4U
- Joined
- Mar 28, 2005
- Messages
- 2,852
Hi there, question about my new drive. Samsung's site quotes 550 and 520 as the read write speeds and I'm getting 400 and 247. In addition, Samsung Magician gives a "drive not supported" message. It also says unable to detect interface, AHCI mode - N/A, and Rapid Mode - Not supported.
System boots fine, and is set to AHCI in the bios. Speccy shows the drive is connected to a Sata3 port.
Any insight? Thanks in advance.
System boots fine, and is set to AHCI in the bios. Speccy shows the drive is connected to a Sata3 port.
Any insight? Thanks in advance.