Ryzen 5 2600 stability issues

Tengis

Supreme [H]ardness
Joined
Jun 11, 2003
Messages
6,076
I've been screwing around with this system for a couple days and it gets blue screens regularly... trying to get work done and it crashes when doing something as simple as unzipping a rare file.

CPU has been run with higher voltage and SOC voltage to see if stability gets better. Ram has been run at lower speeds with slightly tweaked voltage to see if stability improves.

I updated the bios but it didn't make a difference.

Any common issues? The bsods I primarily am getting say they are from "memory management".

CPU:
Ryzen 5 2600

Motherboard:
ASRock B450M-HDV R4.0

Ram:
https://www.amazon.com/dp/B07WLCWQV5/ref=cm_sw_r_cp_apap_LRskFFlOczTgZ
 
As an Amazon Associate, HardForum may earn from qualifying purchases.
What speed is the memory running at?

Lower the speed to 2933 and test it again.
 
I ran it at both the xmp profile (3200) and whatever the bios detected it at originally (low 2000 something). Memtest is good on one stick so far, going to swap in the other and see how it goes.

Pain in the butt to get the memory out with this massive heatsink in the way.

IMG_20210529_130302.jpg
 
Back
Top