I have had a CoolerMaster Centurion 5 for a few years now. I used to used a 80mm fan I bolted to the door that already had cut-out and grill built in. Now I purchased a Xigmatek HDT-S1283 HSF and it probably comes right out to the door with maybe a 10mm to 15mm spacing, not worth buying a 80x80x15mm in my opinion.
I was thinking about using my 3" air grinder to cut out a spacing for 2x 140mm fans and mount them externally. I usually use the air grinder for automotive and worried about it kicking up and grinding into the black powdercoat paint. I was thinking masking the whole door off, but any tips about kick back? I was thinking of maybe using a air controller and maybe using 75psi, I think max rated for 90psi although I still let it use up 120psi off the compressor (only recently bought the controller and don't even know if it works).
TIA.
I was thinking about using my 3" air grinder to cut out a spacing for 2x 140mm fans and mount them externally. I usually use the air grinder for automotive and worried about it kicking up and grinding into the black powdercoat paint. I was thinking masking the whole door off, but any tips about kick back? I was thinking of maybe using a air controller and maybe using 75psi, I think max rated for 90psi although I still let it use up 120psi off the compressor (only recently bought the controller and don't even know if it works).
TIA.