Am now running a Gigabyte EP45-UD3P with a Q9550 (at 3400Mhz and 400Mhz FSB and)
Settings are
Vcore 1.25v
PLL 1.5v
CPU Term 1.2v
CPU Ref 0.76v
It looks stable, but do these setting "seem right"?
I keep reading about dangerous PLL voltages and 45nm chips being destroyed by setting PLL to high? So what's normal?
Regards
James
Settings are
Vcore 1.25v
PLL 1.5v
CPU Term 1.2v
CPU Ref 0.76v
It looks stable, but do these setting "seem right"?
I keep reading about dangerous PLL voltages and 45nm chips being destroyed by setting PLL to high? So what's normal?
Regards
James