goodcooper
[H]F Junkie
- Joined
- Nov 4, 2005
- Messages
- 9,771
So i've been working on this project, got a config i've been editing for different routers, and it seems like 75% of the time the restore fails... (reboots to no activity on all ports, have to reset and access via layer 2)
i allow the default config to go through, then i upload my script and issue the command:
/system reset-config keep-users=no no-defaults=yes skip-backup=yes run-after-reset=config.rsc
i was thinking the failures i was experiencing were relating to the OS versions on the different devices (all RB2011il, but bought at different times)
is that the case? i noticed if i restored from a binary backup it would work.... but then i had to go manually change all the configuration, super tedious...
so i'm just assuming i'm going about this process all wrong...
tips?
i allow the default config to go through, then i upload my script and issue the command:
/system reset-config keep-users=no no-defaults=yes skip-backup=yes run-after-reset=config.rsc
i was thinking the failures i was experiencing were relating to the OS versions on the different devices (all RB2011il, but bought at different times)
is that the case? i noticed if i restored from a binary backup it would work.... but then i had to go manually change all the configuration, super tedious...
so i'm just assuming i'm going about this process all wrong...
tips?