Post your AMD unlock pass/fail here! v. 2.0 + How to unlock (Please limit discussion)

---MANDATORY INFORMATION---
Processor: Athlon II 5000+ 45nm
Unlock pass or fail: Pass all 4
Motherboard: Gigabyte GA-MA78LM-S2H
CPU Cooler:Zip tied Xeon 601 cooler, 55c load
Voltage: 1.25v underload

---ADDITIONAL INFORMATION---
CPU Stepping:0944BPMW
BIOS Version:
Stability test application(s) used: Prime95
Amount of time passed in stability app: 6hrs
Any other pertinent info:
i have 2 of these, same batch, only ran 1 chip so far
im a noob at overclocking amd, so im salowly catching on
265x11 fsb 2915mhz
600 ht (795)
705mhz ram, 2.33x (800mhz ram)
ewiz cpu

http://i15.photobucket.com/albums/a381/skullzaflare/NewBitmapImage-3.jpg
http://valid.canardpc.com/show_oc.php?id=1126027
 
Processor: Phenom II X2 555
Unlock pass or fail: Success 4 Cores
Motherboard: Asus M4A785TD-M EVO
CPU Cooler: Silverstontek NT-06 Evolution + 140mm fan
Voltage: 1.3v

---ADDITIONAL INFORMATION---
CPU Stepping: CACAC AC 1004BPMW
BIOS Version: 2004

This is my second Phenom II X2 555BE 1004BPMW the first one Failed to unlock to either 3 or 4 cores, same batch for second chip and works a treat, managed 3.8ghz with 1.45v :)
 
Skullzaflare said:
---MANDATORY INFORMATION---
Processor: Athlon II 5000+ 45nm
Unlock pass or fail: Pass all 4
Motherboard: Gigabyte GA-MA78LM-S2H
CPU Cooler:Zip tied Xeon 601 cooler, 55c load
Voltage: 1.25v underload

---ADDITIONAL INFORMATION---
CPU Stepping:0944BPMW
BIOS Version:
Stability test application(s) used: Prime95
Amount of time passed in stability app: 6hrs
Any other pertinent info:
i have 2 of these, same batch, only ran 1 chip so far
im a noob at overclocking amd, so im salowly catching on
265x11 fsb 2915mhz
600 ht (795)
705mhz ram, 2.33x (800mhz ram)
ewiz cpu

http://i15.photobucket.com/albums/a381/skullzaflare/NewBitmapImage-3.jpg
http://valid.canardpc.com/show_oc.php?id=1126027
Click to expand...

Your HT bus should be around 1800-2000mhz (3600-4000 ddr)
 
ordovician said:
Your HT bus should be around 1800-2000mhz (3600-4000 ddr)
Click to expand...

oh? im not used to amd, last time was a 939 and was to be kept around 1000 lol
ill definitely upclock it then lol

also, that post is now dated as i have it running prime95 at
300x11 3300mhz
800mhz ram 2.66x i think
1500mhz HT

ill update my post tonight when i get home
 
Processor: AMD PHENOM X3 720 BE 2.8 ghz
Unlock pass or fail: Passed - ALL 4 CORES-
Motherboard: M4A785-M
Voltage: 1.35

CPU Stepping: -have to check-
BIOS Version: -no update- Q4 2009 factory release
Stability test application(s) used: Prime 95, 5 multi session super PI, sisandra, gaming
Amount of time passed in stability app: Tested and Retested
Any other pertinent info: Running on generic samsung ddr2 800 4gb dual channel, runs fine at 2200 mhz HT, Need to recheck everything with the latest sisanda.
 
=HPSF=Roadrunner said:
---MANDATORY INFORMATION---
Processor:phenom II X2 550BE
Unlock pass or fail:PASS
Motherboard:Asus M4A79XTD EVO
CPU Cooler:AC Freezer Pro 64 (upgrading tomorrow
Voltage:1.4625 (for OC'd settings)

---ADDITIONAL INFORMATION---
CPU Stepping:CACYC AC 0927MPMW
BIOS Version:0605
Stability test application(s) used:prime95
Amount of time passed in stability app: 3 hours BC2 13hrs FaH using 78%, 1hr prime95
up and running 49.8hrs
Any other pertinent info: 3.6 @ 1.4625 bus up 300 and clocked at 12. settings are for memory reasons only to maintain 1600 800mhz 7-7-7-24 @1.7v ocz platinum. PCIe 115.
The pci and fsb setting help for running older gpu's. I currently have a nVidia 8400gs that is over clocked using evga precision and even that barely ran BC2, now i am able to run it on medium with no lag.

It seems no matter how hard i try i can not get bast the 3.6 mark. even locked back to a dual core im lucky to post much less log into windows. And i was really hoping to get close to 4:D
Click to expand...
 
---MANDATORY INFORMATION---
Processor: Phenom II x2 555
Unlock pass or fail: Pass (4 cores)
Motherboard: DFI lanparty 780gx-m3h5
CPU Cooler: Thermalright TRUE 120
Voltage: 1.4

---ADDITIONAL INFORMATION---
CPU Stepping: ??
BIOS Version: D7JD519A
also tried bios, D7JD826 (no joy) and the bios that the board came with (number not known) also no joy.. so went back to D7JD519A. seems stable at 3.8 @ 1.4v but crashed 4.2 @ 1.4v... will do prime95 later maybe at 4.0 @ 1.4v... also got BSOD @ 4.2 under load and when rebooted the bios screen said AMD engineering sample, and cpuz stated "phenom II 00 TWKR" which ran at 1.6 no mater what multi i had in bios. reset defaults and now says phenom II B55. 3.2
 
Last edited:
---MANDATORY INFORMATION---
Processor: Phenom II x2 555
Unlock pass or fail: Pass / Unknown (4 cores)
Motherboard: MSI 785g E-51 Pro
CPU Cooler: Cooler Master Gemini II
Voltage: 1.4

New here,

I got a quick question. I just unlocked my Phenom II x2 555BE into quad. I raised the CPU Volt to 1.4 and the NB to 1.25 Yesterday I did a small FTTs test and I let it run for 6 hours and had zero errors. I have a MSI 785G E-51 mobo.

This morning I let it run for 5 hours on blend and got an error on one of the cores right when I got home to check it.

Should I do something else to make it more stable? Or is this a failed quad?

My temps are around 55C on full load quad core. They are about 43C full load dual core.
 
j1979 said:
---MANDATORY INFORMATION---
Processor: Phenom II x2 555
Unlock pass or fail: Pass (4 cores)
Motherboard: DFI lanparty 780gx-m3h5
CPU Cooler: Thermalright TRUE 120
Voltage: 1.4

---ADDITIONAL INFORMATION---
CPU Stepping: ??
BIOS Version: D7JD519A
also tried bios, D7JD826 (no joy) and the bios that the board came with (number not known) also no joy.. so went back to D7JD519A. seems stable at 3.8 @ 1.4v but crashed 4.2 @ 1.4v... will do prime95 later maybe at 4.0 @ 1.4v... also got BSOD @ 4.2 under load and when rebooted the bios screen said AMD engineering sample, and cpuz stated "phenom II 00 TWKR" which ran at 1.6 no mater what multi i had in bios. reset defaults and now says phenom II B55. 3.2
Click to expand...
If thats a real TWKR Phenom II its worth a bundle I have a CPU Magazine just on the TWKR which is a hand picked processor for only the Best overclockers in the World. Just google TWKR.


Duane, MI
 
Skullzaflare said:
---MANDATORY INFORMATION---
Processor: Athlon II 5000+ 45nm
Unlock pass or fail: Pass all 4
Motherboard: Gigabyte GA-MA78LM-S2H
CPU Cooler:Zip tied Xeon 601 cooler, 55c load
Voltage: 1.25v underload

---ADDITIONAL INFORMATION---
CPU Stepping:0944BPMW
BIOS Version:
Stability test application(s) used: Prime95
Amount of time passed in stability app: 6hrs
Any other pertinent info:
i have 2 of these, same batch, only ran 1 chip so far
im a noob at overclocking amd, so im salowly catching on
265x11 fsb 2915mhz
600 ht (795)
705mhz ram, 2.33x (800mhz ram)
ewiz cpu

http://i15.photobucket.com/albums/a381/skullzaflare/NewBitmapImage-3.jpg
http://valid.canardpc.com/show_oc.php?id=1126027
Click to expand...

you got it stable full load at 1.25v and 2915mhz?
thats really good.

did you note the text on the cpu something like CAVxxxx

edit--- > I just realize this thread is not for discussion, how do I delete this post?
 
General inquiries are fine. We just want to avoid people doing ALL of their helping and troubleshooting in this thread. This is obviously not the place for that. However, if you want to ask a quick question or comment on someone's setup that's reported here, go right ahead. It's actually encouraged, since the more info we gather, the better.

I hope that makes sense :)
 
heres my update
---MANDATORY INFORMATION---
Processor: Athlon II 5000+ 45nm
Unlock pass or fail: Pass all 4
Motherboard: Gigabyte GA-MA78LM-S2H
CPU Cooler: XT-1264
Voltage: 1.29v

---ADDITIONAL INFORMATION---
CPU Stepping:0944BPMW
BIOS Version: F4
Stability test application(s) used: Prime95 and IBT
Amount of time passed in stability app: 9hrs, ITB 40 passes maximum stress
Any other pertinent info:
i have 2 of these, same batch
300x11 1/29v
ram at 2.66x 799mhz 5-5-5-15
ewiz cpu

http://i15.photobucket.com/albums/a381/skullzaflare/NewBitmapImage-7.jpg
http://valid.canardpc.com/show_oc.php?id=1143328
 
---MANDATORY INFORMATION---
Processor: Athlon 5000+
Unlock pass or fail: PASS (4-cores)
Motherboard: Biostar TA790GXB A2+
CPU Cooler: CoolerMaster GoldenOrb
Voltage: 1.36V

---ADDITIONAL INFORMATION---
CPU Stepping: 0944BPAW
BIOS Version: Jan '09
Stability test application(s) used: OCCT
Amount of time passed in stability app: 12 hours
Any other pertinent info: Passed 12 hours of OCCT unlocked and overclocked to 250x11 = 2750 mhz @ 1.36V. I'm very, very pleased for $35.
 
I'm kind of interested in how good the IMC is on these that unlock. I've got a 555 that seems voltage thirsty when trying to run more then 2600 on the cpu-nb. Don't get me wrong, its a lot better than the 550 that I have that fully unlocks too. To run 2600 cpu-nb, I'm closing in on 1.4v where as the 555 does it with .100v less. Pushing beyond there though really starts eating away at the volts.

I've skimmed through some of the voltages and speeds of the C3 X4s and they appear to do better than my C3. I just wanted to ask everyone else what they've been able to do to see if maybe its just the chip.
 
Skullzaflare said:
oh? im not used to amd, last time was a 939 and was to be kept around 1000 lol
ill definitely upclock it then lol

also, that post is now dated as i have it running prime95 at
300x11 3300mhz
800mhz ram 2.66x i think
1500mhz HT

ill update my post tonight when i get home
Click to expand...

I have similar stepping cpu, my motherboards limit my overclocking ability at 265fsb :(
 
Processor: AMD Athlon X2 5000 2.2 MHz 45nm AM2+
Unlock pass or fail: Passed
Motherboard: US2H
CPU Cooler: Freezer 64 pro
Voltage: 1.325
Speed: 2915mhz

CPU Stepping: CACUC AC 0946BPMW
BIOS Version: F5
Stability test application: I tested 10 mins of OCCT on high, will later on test other stability apps

Any other pertinent info: Unlocked to Phenom FX-5000 quad core (Deneb) with 6mb L3.

Sadly my motherboards only accept 265fsb :(

I have 4 of these with exact same stepping, but only one tested so far.
 
---MANDATORY INFORMATION---
Processor: AMD Phenom II X2 555BE
Unlock pass or fail: Success
Motherboard: Asus M4A785-M, added mofset sinks
CPU Cooler: Cooler Master Hyper 212+
Voltage: 1.47V in BIOS, reports weirdly

---ADDITIONAL INFORMATION---
CPU Stepping:
Family: F
Model: 4
Stepping: 3
Revision: RB-C3
BIOS Version: 0803
Stability test application(s) used: OCCT LinPack test
Amount of time passed in stability app: 12 hours
Any other pertinent info:
2n21a8i.jpg
 
Processor: X3 720 BE
Unlock pass or fail: FAIL
Motherboard: Gigabyte GA-MA785GM-US2H
CPU Cooler: Arctic Cooling Freezer Pro
Voltage: Stock (1.30v?)

---ADDITIONAL INFORMATION---
CPU Stepping: 0907DPMW
BIOS Version: Tried F5 and F10
Stability test application(s) used: N/A
Amount of time passed in stability app: N/A
Any other pertinent info: Unlocks cores, but not stable at boot. BSOD
 
---MANDATORY INFORMATION---
Processor: Athlon X2 5000+ 45nm
Unlock pass or fail: FAIL
Motherboard: Gigabyte MA78LM-S2 rev 2.0
CPU Cooler: Hyper 212+
Voltage: 1.4v


---ADDITIONAL INFORMATION---
CPU Stepping: CACVC AC 0947EPMW
BIOS Version: F3-F8
 
Processor: Phenom II X2 545
Unlock pass or fail: Pass 4 cores
Motherboard: Gigabyte GA-MA790FX-UD5P
CPU Cooler: Scythe "MINE Rev.B "
Voltage: 1.35 @3.4g

---ADDITIONAL INFORMATION---
CPU Stepping:
BIOS Version:
Stability test application(s) used: AMD Overdrive stability test, folding SMP
 
---MANDATORY INFORMATION---
Processor: Phenom II x4 555 BE @ 4ghz
Unlock pass or fail: Pass 4 cores (2 had unlocked but one was unstable above 3.6 ghz)
Motherboard: Gigabyte MA790X-UD4P
CPU Cooler: XSPC Delta v3
Voltage: 1.4v (unlocked stable @ 1.4 but have it at 1.55)

---ADDITIONAL INFORMATION---
CPU Stepping: C3
BIOS Version: F9
Stability test application(s) used: Prime95
Amount of time passed in stability app: 5 1/2 hours
Any other pertinent info: Had to set ACC to Hybrid (didn't unlock when on normal).
 
Last edited:
---MANDATORY INFORMATION---
Processor: Phenom II X2 550 BE
Unlock pass or fail: Pass Tri-Core (4-cores causes BSOD on boot0)
Motherboard: MSI 785GT-E63
CPU Cooler: Tuniq Tower 120
Voltage: 1.35v stable (1.45v @ 3.7Ghz stable)

---ADDITIONAL INFORMATION---
CPU Stepping: ??
BIOS Version: ??
Stability test application(s) used: Prime95
Amount of time passed in stability app: ~12 hours
Any other pertinent info: None?
 
Processor:555BE
Unlock pass or fail:Fail
Motherboard:Gigabyte MA770-UD3
CPU Cooler:Xmigatek HDT S1283
Voltage:1.4

---ADDITIONAL INFORMATION---
CPU Stepping:CACAC AC 1004BPMW
BIOS Version:FHa
Stability test application(s) used:
Amount of time passed in stability app:
Any other pertinent info: Tried this chip on 2 other Mobos an Asus M4A785D-M Pro and a MSI 77oT-C45 and it would not unlock on them either. No matter what Vs or +/- settings were applied.
 
---MANDATORY INFORMATION---
Processor: Phenom II x4 810
Unlock pass or fail: Pass 4 Cores
Motherboard: Asus M4A785TD-M EVO
CPU Cooler: Copper Orb
Voltage: Auto

---ADDITIONAL INFORMATION---
CPU: Turns 810 into 910
Cache: Turns 4MB cache into 6MB cache
Stability test application(s) used: Prime95
Amount of time passed in stability app: 10+ hours
 
Processor:555BE (from Frys in Atlanta)
Unlock pass or fail:Fail
Motherboard:MSI 785GM-E51
CPU Cooler:Stock
Voltage:1.35 (stock)

---ADDITIONAL INFORMATION---
CPU Stepping:3 (from cpu-z)
BIOS Version:2.3
Stability test application(s) used: prime
Amount of time passed in stability app: system shuts off after 1 run

All 4 cores unlock fine and the system runs fine in normal desktop usage but shuts off during testing. I thought the system shutting down during stress testing was due to the PS but I got a new 460W PS with 2 18V rails and that should certainly be enough using the onboard vid and 1 HD. Strange that the system actually shuts completely off instead of just crashing or locking up. How do you determine what cores it is using in 2 core mode? I want to try enabling the other cores one at a time to see if there is one bad core.
Any suggestions for stabilizing the system? More Vcore?
 
---MANDATORY INFORMATION---
Processor:phenom II x2 555
Unlock pass or fail: PASS 4 CORE
Motherboard:Gigabyte MA790X-UD4P
CPU Cooler:Corsair H50
Voltage:1.4

---ADDITIONAL INFORMATION---
CPU Stepping:CACAC AC 1008FPMW
BIOS Version:f9
Stability test application(s) used:eek:cct
Amount of time passed in stability app:7.5 hours
Any other pertinent info: BOUGHT ONLINE NCIX RECEIVED IT MAY.3,2010
 
speedfrk said:
Processor:555BE (from Frys in Atlanta)
Unlock pass or fail:Fail
Motherboard:MSI 785GM-E51
CPU Cooler:Stock
Voltage:1.35 (stock)

---ADDITIONAL INFORMATION---
CPU Stepping:3 (from cpu-z)
BIOS Version:2.3
Stability test application(s) used: prime
Amount of time passed in stability app: system shuts off after 1 run

All 4 cores unlock fine and the system runs fine in normal desktop usage but shuts off during testing. I thought the system shutting down during stress testing was due to the PS but I got a new 460W PS with 2 18V rails and that should certainly be enough using the onboard vid and 1 HD. Strange that the system actually shuts completely off instead of just crashing or locking up. How do you determine what cores it is using in 2 core mode? I want to try enabling the other cores one at a time to see if there is one bad core.
Any suggestions for stabilizing the system? More Vcore?
Click to expand...

Did you watch your voltage during testing to see how stable it was? I've had one experience with a MSI board (770-C45) and I really didn't like it. It did unlock my 550 without a problem at stock voltage but I was using a 650w Neopower Antec. My voltage will still all over the place during load testing and it made overclocking a challenge.

Also, what power supply are you running? I know you said your not running much but if it is a cheap unit that could give you problems too. What's the max combined wattage or amperage of the two 12v rails?

Did you try testing it loaded on 2 cores or overclocked on just 2 cores? Shutting down sounds like overload/temperature protection on the power supply.
 
mastrdrver said:
Did you watch your voltage during testing to see how stable it was? I've had one experience with a MSI board (770-C45) and I really didn't like it. It did unlock my 550 without a problem at stock voltage but I was using a 650w Neopower Antec. My voltage will still all over the place during load testing and it made overclocking a challenge.

Also, what power supply are you running? I know you said your not running much but if it is a cheap unit that could give you problems too. What's the max combined wattage or amperage of the two 12v rails?

Did you try testing it loaded on 2 cores or overclocked on just 2 cores? Shutting down sounds like overload/temperature protection on the power supply.
Click to expand...

Yeah, I tried 2 different PS... the 460 I mentioned is a new Cooler Master Elite with 2x12V rated at 18A each. I did test it loaded on 2 cores and it was fine. The shut down problem seems like a MB issue but I can't be certain since the MB won't post after I updated the bios. I sent an RMA request to MSI over a week ago and still haven't heard anything from them.
 
---MANDATORY INFORMATION---
Processor: AMD X2 550@ 3.4 so far :p (4 cores active)
pass or fail: Unlock
Motherboard: Asus M4N98TD Evo (Nvidia Sli Board)
CPU Cooler: Swiftec Apogee GT
Voltage: 1.328

---ADDITIONAL INFORMATION---
CPU Stepping: C2 CACYC AC 0921GPMW
BIOS Version: 0603
Stability test application(s) used: Prime95
Amount of time passed in stability app: 12 hrs
Any other pertinent info: cpu passed on mobo in sig which I posted in original thread



Nice to see you can use Asus Core Unlocker on sli mobo and it works :p
 
---MANDATORY INFORMATION---
Processor: Phenom II x2 555 BE
Unlock pass or fail: PASS (4 cores)
Motherboard: Gigabyte MA790X-UD4P
CPU Cooler: True 120
Voltage: 1.35v

---ADDITIONAL INFORMATION---
CPU Stepping: C
BIOS Version: F9
Stability test application(s): Prime95
Amount of time passed in stability app: 10 Hours
 
---MANDATORY INFORMATION---
Processor: Phenom II x3 720 BE
Unlock pass or fail: PASS (4 cores)
Motherboard: Gigabyte MA790XTA-UD4P
CPU Cooler: Corsair H50
Voltage: 1.4875v


---ADDITIONAL INFORMATION---
CPU Stepping: C2
BIOS Version: F3
Stability test application(s) used: OCCT
Amount of time passed in stability app: 1hr
Any other pertinent info: it was part of the batch that had a high success rate of unlocking 4th cores when they first came out like 0509 or something like that. I have it lapped now so I can't tell. Hope this helps.
 
---MANDATORY INFORMATION---
Processor: Phenom II 555
Unlock pass or fail: Pass - 4 cores
Motherboard: MSI 870A-G54
CPU Cooler: Coolermaster Hyper 212 Plus
Voltage: 1.375 Stock 3.2ghz - 1.43 OC 3.8ghz

---ADDITIONAL INFORMATION---
CPU Stepping: CACAC AC 1009APMW STepping 3
BIOS Version: 17.1
Stability test application(s) used: Prime95
Amount of time passed in stability app: 12 hours
Any other pertinent info:
Ambient Temp: 25
Idle Temp: 30
Prime95 TT 47
 
Last edited:
Got another 555BE for a friend...actually with the way it's OCing so far, this one's for me and he'll get the one in my sig.
---MANDATORY INFORMATION---
Processor: Phenom II X2 555 BE
Unlock pass or fail: Pass (4 cores)
Motherboard: Asus M4A89GTD Pro/USB3
CPU Cooler: Hyper 212+ Push/Pull
Voltage: [email protected]

---ADDITIONAL INFORMATION---
CPU Stepping: 1008FPMW
Stability test application(s) used: IBT/Prime 95
Amount of time passed in stability app: Haven't stability tested, still OCing this one, 3.95ghz so far.
Any other pertinent info:Ordered from Newegg on 5/30.
 
Thanks jdlucid and Kueller. Been seeing those 10xx batches on Ebay recently and wasn't too sure about them.

For anyone looking for a known AM3 chip that unlocks, best advise I would give it watch Ebay. I've picked up now 3 chips (550, 555, and 435) that fully unlock and were known decent overclockers. All while paying no more than list for them.

With that said, got to add in that Athlon I mentioned. All voltages are stock and correctly shown in AOD.

---MANDATORY INFORMATION---
Processor: Athlon II X3 435
pass or fail: pass
Motherboard: Gigabyte 790FXT-UD5P
CPU Cooler: Noctua NH-D14
Voltage: 1.325 (stock vid)

---ADDITIONAL INFORMATION---
CPU Stepping: CACYC AC 0949BPMW
BIOS Version: F7
Stability test application(s) used: Prime95
Amount of time passed in stability app: 19+ Hours
Any other pertinent info: Unlocks fully including L3 cache and is stable. Set ACC to hybrid, per core 0,0,0,-2% from the get go. Leaving ACC set to hybrid but disabled did not unlock anything extra.

For anyone looking for a Athlon with possible L3 cache to unlock, just check for the core code to be CACYC AC for a C2 chip. Those will be the ones that use a Deneb core and not the normal Propus core.

AthlonIIX3435.jpg

19HrP953GBAthlonIIX3435fullunlockst.jpg
 
---MANDATORY INFORMATION---
Processor: X2 5000+ AM2+
Unlock pass or fail:pass all 4
Motherboard:785GT-E63
CPU Cooler:Cooler Master Hyper TX2
Voltage: 1.328

---ADDITIONAL INFORMATION---
CPU Stepping: CACUC AC
BIOS Version:28.3
Stability test application(s) used: prime95
Amount of time passed in stability app:6 hours
Any other pertinent info: Unlocked to Phenom FX-5000 quad core OC stable @ 2.86GHz. @1.328v
http://i48.tinypic.com/b8o8p4.jpg

I`m having trouble getting over 3.0ghz. I tried adjusting the NB and HT but it wont POST sometimes. What should I be looking at in terms of NB/HT? Im using OCZ OCZ2VU8002G4GB DDR2800
 
You'll have to raise the NB chipset voltage and the CPU memory controller voltage. A 260 mhz HT bus is already pushing what a 785G chipset is capable of, though. You might just be running into your motherboard's limitation.
 
ordovician said:
You'll have to raise the NB chipset voltage and the CPU memory controller voltage. A 260 mhz HT bus is already pushing what a 785G chipset is capable of, though. You might just be running into your motherboard's limitation.
Click to expand...


cr0w said:
---MANDATORY INFORMATION---
Processor: Athlon X2 5000+
Unlock pass or fail: Pass
Motherboard: MSI 785GT-E63
CPU Cooler: Kingwin XT-1264
Voltage: Stock, reads as 1.32V

---ADDITIONAL INFORMATION---
CPU Stepping: CACVC CA 0932FPBW
BIOS Version: V28.2 12/31/2009
Stability test application(s) used: AMD Overdrive, OCCT, Prime95
Amount of time passed in stability app: Prime95 16 hours
Any other pertinent info: From ewiz.com mid-March

Currently overclocked to 3025mhz CPU, 2200mhz NB, 1925mhz HT, 275mhz fsb at stock voltages for everything (8 hours prime stable, 10 hours OCCT stable). Cool n quiet works perfectly fine, too.
Click to expand...

what about that guy?
 
You must log in or register to reply here.
Back
Top