Please advise - desk for 3x22" + 30" display?

[Matrices]

I want to try to run three 22" displays in Eyefinity arrayed below or above a single 30". My current desk is about 65" and I have 70" of space to place a desk. While my current desk width is plenty of space to make this happen, it's also a combined hutch with drawers, so the hutch gets in the way of a higher pole (to mount the 22" monitors above/below the 30") and its left 1/3 is raised for some random reason.

Anyone have desk suggestions for about 70" of space in a straight line? If it has drawers or cabinets at all, that would be a plus, but it probably can't have a hutch.

I also do not want an L-shaped desk unless it's also at least 45" to 50" on the long side.

 

[suiken_2mieu]

Cut off the hutch (I hate them, they get in the way of monitors). You can make a stand out of wood and put the 30"r on it. Have the 3 x 22"rs in front.

Similar to this:


That's what i did for a while.

 

[Matrices]

Can't argue with that. I'll simply remove the hutch, place the 3x22" on a longer pole for the KT 325 mount, and leave the 30" below on its own stand.