Phase change system in need of some parts!

B

BitchBreaker

[H]ard|Gawd
Joined
Jun 16, 2004
Messages
1,836
I need to fond a pre made evap head for my phase change unit im building for a friend,Hes gona run it on a FX-55 and i really dont want to have to machine one..i seen a guy some place (if ONLY my memory was as good as my rig's) that makes pre made evap's with braided flex hose allready attached..where can i find him? or some one that has a spare for sale? or hell a old ass vapo clasic would be good to steal the evap off of then mod it,any help is groovy!
 
Thanks..i really dont want to have to cut a head..i have all the gear to do it (IE: Bridgeport milling machine) ect..but a pre made unit would own!
 
<--could go into the "making the nice evap and water block's buisness"

if you got a lathe machine = batta bing batta boom

I think i'll get around to starting my block tommorow. I'll show you soem pics when i get done. If you got the tools, only cost ya $20 or so for the block and less than $3 for 1.5" copper pipe to enclose it in with silver solder.
 
Yes iv built many custom blocks,and im the guy that mods all the Aqua Computer gear..i know i can cut the evap in no time but the problem is..i have no time :eek: ..sure id buy a evap from ya...LMK how much? hit me up on AIM if ya wana chat,or i can call ya if ya want me to, aim is Cpt1337
 
Actually, the baker block is the most popular and best performing. Look here: http://www.xtwerkz.com/baker_cpu_blocks.htm
You can even get it with an evap enclosure which will allow easier mounting and insulating. I suggest you get the prebrazed one, unless you're good a brazing. I melted mine trying to do it. :(
 
Jonsey said:
I melted mine trying to do it. :(
Click to expand...

lol ouchy.

The back isn't a bad choice for $75 or so. Got a local "Pensacola Rubber Specialties" that my guys where i get my cascade parts from suggested. BTW man, if you need some parts i can get them pretty good price. I'm thinking about building cascade's to sell possibly, mainly simple single stages though. And cascade's per request. Speaking of which......

<plug>would anyone be interested in buying a 2-stage cascade cooler from me....alot more performance than buying a $800 pre-made unit and cheaper....</plug>



If your in a pinch and need something let me know, pay shipping and the real cost of the part and i'll ship it to ya'

I picked up a nice oil seperator from this shop for about $80. Pretty good pricing on their stuff. The dryer w/ shrader & 1/4" pre soldered pipe cost me like $12.

http://www.namike.com/albums/album02/COOLER2.sized.jpg

and linky to were i'm at on my cascade right now.

http://www.namike.com/albums/album02/EDIT_FINAL_PIECES.jpg
 
i have every thing cept some schrader valves and the evap..got to pic up some silver brazing rods also!
 
gclg2000 said:
lol ouchy.

The back isn't a bad choice for $75 or so. Got a local "Pensacola Rubber Specialties" that my guys where i get my cascade parts from suggested. BTW man, if you need some parts i can get them pretty good price. I'm thinking about building cascade's to sell possibly, mainly simple single stages though. And cascade's per request. Speaking of which......

<plug>would anyone be interested in buying a 2-stage cascade cooler from me....alot more performance than buying a $800 pre-made unit and cheaper....</plug>



If your in a pinch and need something let me know, pay shipping and the real cost of the part and i'll ship it to ya'

I picked up a nice oil seperator from this shop for about $80. Pretty good pricing on their stuff. The dryer w/ shrader & 1/4" pre soldered pipe cost me like $12.

http://www.namike.com/albums/album02/COOLER2.sized.jpg

and linky to were i'm at on my cascade right now.

http://www.namike.com/albums/album02/EDIT_FINAL_PIECES.jpg
Click to expand...

Can you get compressors/condensors/evaporators?

All my stuff is way too big. I want a really small compressor, around 1,000 - 1,500 btus that will fit in my case. My 5000 btu compressor and compressor are too big.
 
Bitch i got your:

(4) T shrader 1/4" valves and (4) 15% silver solder rodes ready to ship. PM'ed....so PM me back and i'll get ti out to ya.

It depends exactly on what your looking for....i can get most things pretty easy....PM me a list of exactly what your looking for. And i can give you a quote.

No i don't own one. But bitch does.
 
vapb400 said:
do you OWN a bridgeport machine? or just have access to one?
Click to expand...


I OWN as in its in my shop right now..my shop is 50' from my back door..

Thanks bro ill have u PP as soon as u get me the total.
 
Its a beautifull machine and whne the quill is center,,the cooling fluid is flowing..D12 on in the back ground and its me and a piece of copper its pure bliss ;)
 
You must log in or register to reply here.
Back
Top