P8P67 Pro 82579V NIC running at 100 mbit only?

Adam1203

Limp Gawd
Joined
Feb 11, 2011
Messages
159
Hi Everyone,

I have a P8P67 Pro with the latest 16.1 Intel LAN drivers installed (previously had 15.6 and 16.0). I have noticed on with each driver set, that my NIC eventually switches to 100 mbit and will not flip back to gigabit. I have ran the diagnostics and everything comes back fine. The only way to get it back to a full duplex gigabit connection is to uninstall/reinstall the drivers. Also, if I try to force it to a gigabit connection, the NIC just sits at "cable unplugged".

I have a Linksys E3000 with the latest firmware (not hacked). So I doubt it is an issue with the router.

Any thoughts, or others with similar issues?

Here's a screen:

 

bigddybn

Supreme [H]ardness
Joined
Nov 21, 2006
Messages
7,593
An edgy cable could cause this pretty easily. Have you tried another?
 

The Mac

Supreme [H]ardness
Joined
Feb 14, 2011
Messages
4,492
try a different port on your router. Ive had them go bad in the past.
 
Top