Still reports
Code:echo ::sd_state |mdb -k | grep phy_blocksize un_phy_blocksize = 0x200 un_phy_blocksize = 0x200 un_phy_blocksize = 0x200 un_phy_blocksize = 0x200 un_phy_blocksize = 0x200 un_phy_blocksize = 0x200 un_phy_blocksize = 0x200 un_phy_blocksize = 0x200
No Idea unfortunately.
Our padding certainly lines up (and mine is working):
Code:
sd-config-list = "ATA WDC WD20EARS-22M", "physical-block-size:4096";
sd-config-list = "ATA SAMSUNG HD204UI ", "physical-block-size:4096";
My Drives are in a JBOD box with a ck23601 expander via a pass thru m1015 (IT Mode) HBA on OI on top of ESXi5.1.
One question:
I manually edited my sd file via nano and I was logged in as root at the time.
My sd-config-list entry was put at the bottom of the sd file after everything else that was pre-existing.
Are you trying as an admin user?
Could be worth a try as root?