I run across a deal on some 6172s, I just could pass up (I'm sure you understand). I wanted to make sure I'm get the most I can out of them. I wasn't seemingly able to get anything over 232 (2.436 Ghz) to fold for over 24 hours. So I rebuilt the system with the [H] Appliance image and started over, getting basically the same results. I'm I topped out, or anyone have some ideas?
System: H8QGi-+f w/ 4x 6172 w/ CM 212s
Memory is the recommended 16 sticks - Crucial (Yellow ones) 1600 Cas-8
PSU : Corsair AX1200
Running at 233 - 234, I would get a crash reboot back to the login prompt.
While attempting 235 - 237, I would get a crash reboot and hang at the BIOS boot with following
Using the Non Appliance install I along saw the following at the console (Ctrl+Alt+F1) <Side questions anyway to go back to the GUI from the console?>
horde@amd-6172:~$ fahdiag | pastebinit
http://paste.ubuntu.com/5879518/
horde@amd-6172:~/fah$ sudo tpc -dram |pastebinit
http://paste.ubuntu.com/5879528/
horde@amd-6172:~$ sudo egrep -i 'mcelog|machine.check|hardware.error' $(ls -rt /var/log/{messages,syslog}*) |pastebinit
ls: cannot access /var/log/messages*: No such file or directory
http://paste.ubuntu.com/5879521/
PS> I didn't want to clutter the guide with this stuff, if it turns out useful we can link it.
System: H8QGi-+f w/ 4x 6172 w/ CM 212s
Memory is the recommended 16 sticks - Crucial (Yellow ones) 1600 Cas-8
PSU : Corsair AX1200
Running at 233 - 234, I would get a crash reboot back to the login prompt.
While attempting 235 - 237, I would get a crash reboot and hang at the BIOS boot with following
Code:
Node: Bank interleave requested but not enabled
Node0: HT Link SYNC Error
Node1: HT Link SYNC Error
Node2: HT Link SYNC Error
Node3: HT Link SYNC Error
Node4: HT Link SYNC Error
Node5: HT Link SYNC Error
Node6: HT Link SYNC Error
Node7: HT Link SYNC Error
Press F1 to Resume
Using the Non Appliance install I along saw the following at the console (Ctrl+Alt+F1) <Side questions anyway to go back to the GUI from the console?>
Code:
I Ignored bunches of Stack / Call Traces
INFO: rcu_bh detected stall on CPU 19 (t=0 jiffies)
[Hardware Error]: CPU 22oMCO_STATUS[-|CE|-|AddrVICECC]: 0x946e4000da000145
[Hardware Error]: Data Cache Error: Data/Tag DWR error.
[Hardware Error]: cache level: L1, tx: DATA, mem-tx: DWR
INFO: rcu_bh detected stall on CPU 23 (t=0 jiffies)
horde@amd-6172:~$ fahdiag | pastebinit
http://paste.ubuntu.com/5879518/
horde@amd-6172:~/fah$ sudo tpc -dram |pastebinit
http://paste.ubuntu.com/5879528/
horde@amd-6172:~$ sudo egrep -i 'mcelog|machine.check|hardware.error' $(ls -rt /var/log/{messages,syslog}*) |pastebinit
ls: cannot access /var/log/messages*: No such file or directory
http://paste.ubuntu.com/5879521/
PS> I didn't want to clutter the guide with this stuff, if it turns out useful we can link it.
Last edited: