Will list specs first.
SAMSUNG Spinpoint F1 HD753LJ 750GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
EVGA 896-P3-1257-AR GeForce GTX 260 Core 216 Superclocked Edition 896MB 448-bit GDDR3 PCI Express 2.0 x16 HDCP
Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Quad-Core Processor Model BX80562Q6600 - Retail
OCZ SLI-Ready Edition 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model OCZ2N800SR4GK - Retail
GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 ATX Intel Motherboard - Retail
Antec NeoPower 550 550W ATX12V SLI Certified CrossFire Ready Active PFC Power Supply - Retail
So thats my rig. I go to start it up and it turns on for about 1-2 seconds and then automatically shuts off, nothing fully fires up and therefore nothing appears on the monitor. About 2-3 seconds later it automatically starts back up and proceeds to shut down again. This is repeated until I flip the switch on the PSU. I have un built it and put it back together on cardboard. Same error occurs. I tested one of the PSU cables and it was coming out to correct voltage. I'm all out of ideas, I have reseated the heatsink as well. If anyone has an ideas or things to try let me know. Thanks in advance.
SAMSUNG Spinpoint F1 HD753LJ 750GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
EVGA 896-P3-1257-AR GeForce GTX 260 Core 216 Superclocked Edition 896MB 448-bit GDDR3 PCI Express 2.0 x16 HDCP
Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Quad-Core Processor Model BX80562Q6600 - Retail
OCZ SLI-Ready Edition 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model OCZ2N800SR4GK - Retail
GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 ATX Intel Motherboard - Retail
Antec NeoPower 550 550W ATX12V SLI Certified CrossFire Ready Active PFC Power Supply - Retail
So thats my rig. I go to start it up and it turns on for about 1-2 seconds and then automatically shuts off, nothing fully fires up and therefore nothing appears on the monitor. About 2-3 seconds later it automatically starts back up and proceeds to shut down again. This is repeated until I flip the switch on the PSU. I have un built it and put it back together on cardboard. Same error occurs. I tested one of the PSU cables and it was coming out to correct voltage. I'm all out of ideas, I have reseated the heatsink as well. If anyone has an ideas or things to try let me know. Thanks in advance.