xDiVolatilX
2[H]4U
- Joined
- Jul 24, 2021
- Messages
- 2,501
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
which are based on the regular P12, the RGBs are FD bearings and only 49cfm though(compared to the Max).I think i read that its based on the same design as the P12 RGB
God do I hate rgb fans. Stop sapping my cfm/h2o!and only 49cfm though(compared to the Max).
too cool a 5950x and 3090 in one loop while being really quietjfc. why do people need an MO-RA3?
While maintaining a smaller case. Let's be honest, that's perfectly possible to do with less bulky internal radiators.too cool a 5950x and 3090 in one loop while being really quiet
Sweet. I've always wanted a mora3 type rad but just don't have the space for it right now. Pics?I've got 9 P12s on the push side of my MO-RA3 and 9 Phanteks T30s on the pull side. They never really ramp up much at all and stay pretty quiet. I could have gone with all P12s, but I already had 6 T30s when I moved to the MO-RA3. The only issue I have with P12s is that my Aquaero 6 LT doesn't pick up the fan RPMs at lower speeds. When it does pick up at higher speeds like 1100, it shows 11000.
jfc. why do people need an MO-RA3?
too cool a 5950x and 3090 in one loop while being really quiet
I cool a 5950x and a 3080ti with 2x 360s just fine. My CPU caps out at 70c and GPU at 50c~ with fans running low enough I do t hear them.While maintaining a smaller case. Let's be honest, that's perfectly possible to do with less bulky internal radiators.
My 5950x hits way over 70 all the time. I am using pbo, but I believe it did at stock as well. Those chips jump so fast when they spool up. Of course I run my pump and fan curves based on liquid temp, so they take a while to ramp up. Curious how you stay under 70 on the 5950x. Also, we may be looking at different temp readouts as well, cpu temp vs. Tdie/whatever.I cool a 5950x and a 3080ti with 2x 360s just fine. My CPU caps out at 70c and GPU at 50c~ with fans running low enough I do t hear them.
I decided just to bite the bullet and do it. I was running two 240s and a 360 inside a modded Lian Li O11 Dynamic and it was going to be a nightmare to do maintenance on. No way to get to M.2 slots or front I/O and draining and filling would be a nightmare. I built it into my computer cart. The MO-RA3 is on the second level of the cart and a primochill workbench is on the top. I used QD fittings between the MO-RA3 and the Video card so I can swap out the radiator and video card without draining. I have enough slack to change a cpu, but can't change cpu blocks. I didn't want to add any more QDs. I started a build post on it, but never posted finished pictures. I need to do it. All I have on my phone is some build pics.Sweet. I've always wanted a mora3 type rad but just don't have the space for it right now. Pics?
still cheaper than our $36/each....The 120s are in stock now at amazon, for a ridiculous price. P12 Max for $19.99
Be Quiet put out a new 140mm, recently:Need a P14 Max... the 140mm fan market is so stale right now.
May as well get the Be Quiet Silent Wings 4 High SpeedThe 120s are in stock now at amazon, for a ridiculous price. P12 Max for $19.99
super disappointing. I would expect this for a run of a mill brand, not ArcticJust my 2 cents. I got 3 P12 Max on exhausting on my Asus AP201 case, at the bottom intaking are P12 Slims. The P12 Max's have a crickety / whirly sound at any low RPM, any range, doesn't matter, unless you go REALLY low almost at the threshold of stopping. I'm thinking of replacing them with either Noctua or just another 3 P12 Slims so at least they're leveled with RPM / Airflow
that case has some pretty fine "mesh" on top. could it be buffeting from the tiny holes? do they do it out of the case?Just my 2 cents. I got 3 P12 Max on exhausting on my Asus AP201 case, at the bottom intaking are P12 Slims. The P12 Max's have a crickety / whirly sound at any low RPM, any range, doesn't matter, unless you go REALLY low almost at the threshold of stopping. I'm thinking of replacing them with either Noctua or just another 3 P12 Slims so at least they're leveled with RPM / Airflow