New and Improved Watercooling Sticky - Post Your Systems Here

[L1ght]

Heres Mine!







DD-D5 Pump
Swiftech MicroRes
130.1 BIP With Yate Loon fans
Swiftech G4
DD Maze 4 GPU

CM Stacker 810
Silverstone 600 Watt PSU
DFI N4X 754j
AMD 3700+ 2.4 Stock, Socket 754
2 GIG DDR500 G.skill Ram
X1900XTX

 

[grugar]

under UV-light:

sideview throuh window:

sideview open:

the four watercooling blocks:

sb & gpu watercoolers close-up:

complete side with flash:

the front with the tripple hc in the top:

 

[Jiggaman2576]

I need to clean it again, but this is my latest watercooling setup. The hard drive block was custom made, I have another one being made for the other side and I'm designing a new mounting system that will isolate the drives from vibration when I roll it on the floor at lan parties. Enjoy

This one was taken before the hard drive waterblock was installed

Chipset watercooling!

CPU Block

Some 7900GT watercooling action

That should show it pretty well I guess. Some sweet systems on here btw!

 

[damstr]

new update includes the cooler master stacker side window, zalman fan speed controller, uv reactive lights, and my awesome X2 3800+ running @ 2.94

^^^^ these pics are my most recent one's but I did cut those 2 tubes pushing up against the window so now it looks much better.

also the camera I was using was kinda crappy so the pics with the UV reactive lights don't look anything like that. they look a lot more purplish.

 

[BioPort]

aquaporn

cuplex xt
twinplex pro gpu
twinplex chipset
aquastream
aquatube
black ice pro x-flow 120.3

 

[aldy402]

here it is, specs in sig, sorry for the bad pics (cell phone camera)

 

[Bio-Hazard]

 

[madmat]

This is my latest build. Most of it's mine but the CPU and vid cards were on loan for a write-up I was doing

Yeah, I know that 2 of the pics are slightly redundant but the last gives the better internal view.

 

[Drudenhaus]

Drilled out my V2100 today and mounted a few things...

MCP655, Micro-res, MCR-220, Yate Loon D12SL-12
(Need another bolt and nut to mount the res to the one brace, have to get that tomorrow)

Ran out of time tonight, but tomorrow these might get some use:

Maze4 low profile SLI kit and Storm


What do you guys think?

 

[Drudenhaus]

looking good. would love to see how you route from reservoir to pump. the lo pros with the new barbs look nice as well.

Like this maybe?

 

[Drudenhaus]

Hope this isn't too big...

To do:

1. Buy more zip ties (ran out) and clean up the jungle of cables.
2. Get some of those tube coils (or whatever they're called) and ditch the zip ties holding out the kinks.
3. Widen the hole I ran the tubing through.

I don't have a clue how you guys do the SLI bend, but I couldn't get my 5/8" OD Tygon tubing to not kink (tried boiling water and about 50 zip ties, but neither really helped) so I had to do GPU ==> CPU ==> GPU (at least for the time being til I can get some 90 or 45 degree elbows.).

 

[rohcky]

 

[jhego]

At night:

 

[Justshoe]

Updated Loop/Hardware setup. Got my X850XT PCIE Card instead of AGP clocked stable at 560/600, never goes above 45c CPU Clocked at 287x9 with Storm.

In The Dark

 

[Viper87227]

Updated:

I moved around a few blocks, and switched up the fan arangement on the rad (which you cannot see in the pics) as while as got a new GPU block... and then I reworked the hose arangement a bit. Came out nice. Won't last for long though, in a month or two I will be doing a major overhaul and moving to a new case.

Closeup:

Desk shot:

This part gave me a bit of a hassle, DIMM1 on my board is right where the thread wanted to be. A bit of working and I got it though:

 

[A2TheRizzo]

New case and my first time watercooling.

 

[vexvegaz]

update pics:
planned on wc'n both 7900gt's but with all the issues ive been hearing , i wasnt comfortable voiding my warranty

 

[Imitation]

Here's what I've recently put together. Apex ultra kit with MCW60 all internal Pics are full size, watch out.

Pics

 

[Cyber]

 

[Richatarded]

I was NOT happy with it at all, temps were amazing (64-x2 4200 2800mhz @ 32c 100%load) but I thought mounting the raditor outside of the case was ugly.

 

[CRXican]

here's a couple shots of my latest loop in a Cooler Master Stacker STC-T01

 

[Nettwerk]

Redid my main case (other lanli)

 

[mattjbak]

Here it is finally, was horrible to bleed the thing as the res is too small. At least I didn't kill my hardware like I had a feeling that I would. Semi successful first WC. Thanks to ReD.SkY for the help!

Horrible photos I know, Bad lighting + terrible photographer. Sorry about the feet in the one pic also :\. The 80mm fan will be replaced and UV lighting will be added so the dye is actually useful.

AquaXtreme MP-05 SP LE, MCW-60, MCP-655, MCR-220, Alphacool Mini Res, 7/16 Musk, Distilled + Dye-Lite UV blue, Aquacomputer grill, 2x Yate Loons.

 

[vexvegaz]

updated pics, added maze4 sli into the loop

 

[DarthBeavis]

Dual systems (I need to be re-motivated and do some cleanup and wire-management):
There is a dual fan radiator on top and one in the back of the case. Everything except the bay mount resevior (black one) is Danger Den. I pulled out the stock Alienware ALX Koolace crap of course.

 

[CRXican]

Couldn't stand the stock side panel so I ordered up the windowed panel. Had issues with tubes rubbing against the window and getting tweaked hence the black velcro strap things. The CPU out to GPU in tube is still touching the window, too long. It doesn't look like any of the fittings are stressed but because I like to worry, I am stressed. Good thing new tubing is cheap. Anyway, on to the pics:

 

[A2TheRizzo]

Fixed my inlet on my TDX..

my rad

 

[A2TheRizzo]

I did it for shits and giggles, and my fan is pushing 97cfm, so I'm assuming its good enough. Temps are 30-32 idle and 36-37 load so I'm happy.

 

[sladesurfer]

My rig

 

[Deleted member 134350]

Well the Borg have landed and who knew that Marvin would be in charge?

Here is my U2_UFO build. As a member stated because it is so wide open it is tough to hide the wires. I am still working on the wire management.

http://img100.imageshack.us/img100/7826/img1042medium9mg.jpg
http://img92.imageshack.us/img92/3448/img1044medium3wb.jpg
http://img98.imageshack.us/img98/2870/img1050medium6zp.jpg
http://img98.imageshack.us/img98/3664/img1054medium0mk.jpg
http://img228.imageshack.us/img228/9361/img1067medium3ch.jpg
http://img137.imageshack.us/img137/5858/img1071medium3ib.jpg
http://img378.imageshack.us/img378/316/img1083medium6kx.jpg
http://img161.imageshack.us/img161/2923/img1084medium7gt.jpg
http://img124.imageshack.us/img124/7605/img1085medium2yx.jpg
http://img367.imageshack.us/img367/6717/img1086medium4ow.jpg
http://img367.imageshack.us/img367/8259/img1087medium8li.jpg
http://img291.imageshack.us/img291/9800/img1088medium7xp.jpg
http://img367.imageshack.us/img367/479/img1089medium0rm.jpg
http://img291.imageshack.us/img291/8827/img1090medium8br.jpg

 

[Anarchy]

Update - 7800GTX, Aquatube Plexi, Dual Laing ...

I like the Airfilter alot

Ghetto Style fan mount ... but hat side is facing the wall so i don't care

Aquatube Plexi ...

UV Lights :

 

[underdone]

Here's my watercooling that i just setup, looking for suggestions to improve performance etc. Cable management will come as soon as my new mobo get here.

 

[dedwards]

Here is my latest setup - this is my 2nd watercooling build.

Processor - AMD A64 X2 3800+
Motherboard - Asus A8N-SLI Premium
Case - Aerocool Masstige
Power Supply - Seasonic S12-430
Video Card - EVGA 7600GT
RAM - Corsair ValueSelect 1 GB
Hard Disk - Western Digital Caviar SE16 WD5000KS 500 GB
DVD Drive - Samsung SH-S162L/BEBN DVD±R

Radiator - Black Ice Pro II Dual 120mm
Pump - Swiftech MCP655 12V DC Pump
CPU Waterblock - Swiftech Storm Rev. 2
GPU Waterblock - Swiftech MCW60 plus ramsinks
Tubing - Clearflex 60 1/2" ID 5/8" OD
Fans - Nexus 120mm
Misc. - DangerDen Fillport

 

[wheels2040]

Heres mine

 

[MrSneis]

Been waiting to post these for ages, as always it's WIP stuff:

That's not all !

 

[oneil]

Will add more pics tonight

 

[w1retap]

See sig for specs...
More stuff in this thread (http://www.hardforum.com/showthread.php?t=1087320)
CPU core = 28c idle, 36c max load is the highest I've recieved.. mostly max load is at 34c.
Water temp usually stays a constant 27c to 28c.

 

[Elleric]

Here is my water cooled system... I just finished building it. Completely custom.

box running on my desk

and the same image with the lights off

here is the cube from the front, lights are off, with the UV going... the big fan becomes transparent like this, you can see the inside here.

here is a closer shot of the cube with the UV going in the light.

and the same images with the lights off...

and on image with the system running with all the UV lights off...

Here is the inside... only the top hald of the front opens...

and the UV look inside

Specs are in my sig, the cube is small, 13 inches cubed, very cramped and i had to 'make it fit' with the light inverters but that was the price i paid for building it so small. If i were to build another case it would be a scoshe bit bigger.

 

[apex32]

peripherals are : 2005FPW,Logi G7 on a fUncpad F10.s Large,Logi X-530's and a G15 keyboard.

 

[Adidas4275]

Here is mine..... sorry the pics are not as good as the could be...