New and Improved Watercooling Sticky - Post Your Systems Here

[zer0signal667]

Just like the title says, lets see pictures of your watercooling systems.
Let's try to keep questions, comments, and complaints within the other threads, just pics and specs here.

Here is a link to the old sticky, if anybody wants to browse or salvage pics from it...

 

[The_In_Kid]

check sig for specs

*UPDATE*
new CPU p4 3.2E@4Ghz and PSU TrueBlue480 2.0
results:

also not to mention a 16mb 250GB SATA maxtor HD
and 1GB (2x512mb) dual channel OCZ 4000 gold
update: BFG 6600GT o/c

 

[Bio-Hazard]

 

[ProOC]

Here is an old rig of mine. I am currently in the process of building a core i7 machine that I will post here when done.

Athlon64 Venice3500+ @ 2.75ghz (11 X 250mhz) - 4x HT - 166 divider.
MSI K8N Neo2
1 GB Mushkin Level 1 PC3500 (2-3-3-6)
BFG GeForce 6800 GT (425/1080)
Creative Audigy 2zs Gamer
120 GB SATA
Pioneer dvd-r
Antec TruePower 430watt
DangerDen waterblocks on CPU and GPU

And this is my old rig.

 

[MikeTimbers]

See sig for the specs.

 

[Darw1N]

 

[DaveX]

CPU: Dtek White Water Aluminum Top
GPU: Maze 4-1
NB: Danger Den Z-Chip
Pump: Swiftech MCP600
Rad: Chevette Core w/ soldered fill 'n bleed tube

Temps are 29 C ambient, 33 C idle on CPU and 38 C load on CPU.

LEDs on my Sunbeam Rheobus sure are shiny...note that the temp reading is for the hard drive, which is being cooled by the Vantec Vortex.

Meh, will get Chevette core mounted sometime. And no, my tubing isn't dirty . It's a slightly orange tint from adding Prestone coolant (most of it already faded away).

 

[Johnie]

Here's a teaser

 

[dzitzner]

I am kind of emarassed to post with the way most of the rigs look here but here goes.

P4 2.4C @ 3500~3600, 512meg OCZ PC4200EL , AIW 9800pro, 2x Maxtor 200gig sata raid0 SB Audigy2 ZS Plextor 708a DVD RW, Pioneer 120s DVD, Hauppauge PVR 350, Hauppauge PVR 250, Antec 635 caxe,True control 550PS

 

[DiseasedCow]

Here are the specs of my system:

-DD Maze 4 CPU and GPU Block
-Eheim 1250
-D-tek Procore w/ shroud and Panaflow M1A
-Custom T-Line
-Criticool PowerPlant Relay
-Tygon Tubing
-Metal Hose Clamps

I have the progress and development of all my mods/watercooling posted on:
(review dome.com/forums/showthread.php?s=&postid=3207#post3207)
---------^^^ remove spaces for link

Here are just some of the pics:

Tell me what you think about it.

 

[nikhsub1]

 

[dewhite]

Just finished my first WC install, into an Antec Sonata. This is an Asetek Waterchill KT03L20 version 2. I snapped a quick pic for another thread I posted into, so here it is. Will come back and edit when I have more/better:

 

[cmonkey]

 

[Undertaker]

Here is mine i want to do more modification will see......

 

[Bio-Hazard]

I just finished my new external water cooling system. You can read about it here:
http://www.systemcooling.com/waterbox-01.html

Here's a few pics to look at if you don't feel like reading...........

 

[ItsTooHot]

I got this SN41G2 to power an XP2400+ at 2325MHz. And it never gets above 40c.

Ready for a LANparty Baby!

Pick me up! I wanna go!

Baby got watercooled BACK!

 

[thesmelliestsock.]

Pentium 4 2.8B @3.4GHz (28c idle / 35c load)
ASUS P4C800-E Deluxe Motherboard
1024MB DDR400 RAM
eVGA Geforce4 Ti4400 (300/650)
SoundBlaster Audigy2
Tt Aquarius 2, Modded radiator.

Changes coming: Wire sleeving and eVGA Geforce 6800 coming Thursday. New watercooling parts eventually.

 

[fallguy]

 

[Optimummind]

Until I receive the parts necessary to have my 6800GT on its own loop using the DangerDen NV-68 (3/8"), I'm gonna keep using this setup.

The parts should come in a few days. I'll update then.

This is what it used to be:

Due to the low-flow pump of the Koolance and its lacking radiator, however, I disasembled it.
The parts include a Via 1300 pump (370GPH, 6' head), 86 Chevy Chevette heatercore, a Sunon 120mm fan and shroud, a reservoir, and the DD-NV68.

 

[_drk_]

I need to take some better pictures...

 

[Scroatdog]

 

[mashie]

This is how I routed the water.


Hardware:

Shuttle SK83G
AMD64 3400+
BFG 6800 GT OC 256MB
1GB OCZ Platinum PC3200
74GB WD Raptor
Panasonic slim slot in CD-RW/DVD
Dangerden TDX block with nozzle 5
Dangerden NV-68 block
Dangerden round reservoir
Laing D4 12V pump
Thermochill HE80.1
1/2" tubing just for the challenge.


For a full 13 page worklog click here

 

[ViruX]

 

[Exiled]

Here are some pics of my new water cooled rig.

Thermaltake Tsunami Case
Hydor L35 Water Pump
D-Tek Pro 120 Radiator
Swiftech MCW5000 Water Block
Custom BUBBLE TOWER RES.

Computer Specs are.

Abit NF7-S 2.0
XP 2500 @ 2.2GHZ
1GB PC3200 Memory
Radeon 9700 Pro

Thanks to Grahxen for helping out with the mod, and bitching about every last detail. Now only if he would stop making bogus files on my desktop over our wireless lan..........

Here are the pics:

Damn that is sexy....




Here is the link to grahxens original case...

http://www.hardforum.com/showthread.php?t=825433

 

[BlueAqua]

Hello, it's been a long time in the making but it's finally here.

Here are some pictures. My vision came to life.

 

[rahssan]

here are pic of my watercooled setup

here is a night shot

 

[agrikk]

An older temporary watercooling solution that I whipped up for when this rig was being used as a gaming server:

Homemade res. $1.89 in parts from Tap Plastic:

 

[agrikk]

Another pic I scrounged up from way back:

 

[CrimsonSky]

Mecanique:

I made this rig for the cover of my new book The MaximumPC Guide to Extreme PC Mods . You can see more images at thebestcasescenario.com

-Pentium 4 2.8C
-MSI 875P Mainboard
-1 GB Corsair CMX512 3200LL
-Western Digital 74GB 10k RPM Raptor
-160GB Western Digital SATA
-ATI RADEON 9800 SE
-Sound Blaster Audigy2 ZS
-Danger Den Maze4 CPU/GPU water blocks
-Danger Den DD12V-D4 pump
-OS: Win XP Pro

 

[flat4]

really nothing special

 

[mwin]

AMD FX-55, 2gb Corsair PC3200 DDR, 6800 GT. .5" ID tygon all the way through, cools processor, northbridge, and video card.

 

[SocceRich20]

Here is my new system:

 

[Suicidal Insanity]

Finally took the camara home

 

[JessAlba452]

Just finished mine last week!

Side Panel Off >>>

Side Panel On >>>

 

[Rezistor]

 

[Punx_Clever]

Just put this rig together a week or so ago, and finally got some image hosting on the web for the pics.

This is it right before plugging it in and pushing the button (already did 24hr leak test)

The wires could use a little more cleaning, and the hoses are a bit sloppy... but oh well

Here it is, with my laptop, with flash

Without flash (the side fan isn't plugged in, but is a blue LED 80mm)

And a vanity shot for the paint/waterblock/pump

DangerDen TDX
DangerDen DD4 (swiftech mcp350)
BLX radiator
DangerDen HDPE bay res
1/2" lines

Only running the same mild overclock that i ran on air (xp3k+ to 2.2ghz) due to lack of time for actually overclocking the system, but runs at +2* over ambient (31-33*) idle, +8* over ambient load (37-39*)

 

[thabub]

Here it is fellas, nothin fancy.
mobile AXP @ 2.6ghz 1.8v
dtek spiral block
dtek csp750 pump
dangerden round res
chevette hc push/pull with 2 aluminum frame 120s

 

[Odie812]

My setup, I just finished it last week.

The internals:

Swiftech MCW6002-64
Silverprop FusionHL
DTek Pro 120 heatercore
AquaXtreme 50Z-DC12
Clearflex60
Distilled water + 12% Hy-Per Lube from PepBoys

Don't worry, since this pic I have fixed the orientation of the CPU block so it's correct

Odie

 

[Unoid]

Why do there have to be so many WC pic threads? I've done this like 3 times now on hardocp. Since I didn't find my name in this thread I'll post it again:

more at my link in sig

 

[Suntar]

-

-

-

-

-

-

Thanks to ImageShack for Free Image Hosting

---

BrassTop TDX Socket 775
DD D4 Pump
DD Maze4 Rev.
BlackIceXtreme Dual 120

---