Need to convert PCI-E connectors to Molex (not the usual)

[Hurin]

Hi All,

I've got a bunch of PCI-E risers coming that will only take molex 4-pin or SATA power in.

I've got a 1200W Thermaltake Toughpower which only has 20A on the v1 12v rail. . . and that is the only rail feeding the molex and sata connectors.

I've got a ton of 12v power to spare on this PSU, but it's flowing on the wrong connectors (the PCI-E ones, intended for video cards).

I have not been able to find a female PCI-E to male 4-pin molex. I guess they don't exist.

Any ideas? Other than getting a new (single 12v rail) PSU that is? Would hate to see this 1200W beast put out to pasture.

 

[Tsumi]

If you can't find one, the next best option is to make your own. If you have any experience with crimping and stripping wires, it should be a piece of cake. The connectors are easy to get, and you would just need to buy the pins, cut some wires, crimp some pins, and insert the pins into the connectors.