Need suggestions on how to wrap my PSU wires

R

rsnellma

Gawd
Joined
Jul 17, 2002
Messages
639
I need some sites, stores, suggestions, etc. to wrap my PSU wires to make them nice and neat. I know, that is just being particular, but I really like nice and tidy. Anyways, if you could help out I would greatly appreciate it. Thanks in advance.

Bob2001
 
www.svc.com has fairly unbeatable prices for sleeving gear
My only suggestion is that you buy a molex remover tool, it helps immensly. The ATX remover is overkill tho, especially for the price
 
http://www.3dcool.com/?module=product&sku=VTSLEEVINGKIT

I picked up a few Vantec Cable Sleeving kits
not a bad all in one solution (no removal tools)
10 ft. - 1/8" sleeving
10 ft. - 1/4" sleeving
5 ft. - 3/8" sleeving
5 ft. - 1/2" sleeving
10 - tie wraps
1 ft. - 9mm Heatshrink Tubing
1 ft. - 20mm Heatshrink Tubing
6 in. - 25mm Heatshrink Tubing
various colors

and there are color connectors as well
http://www.3dcool.com/?module=product&sku=PSUCHANGEOVERKITBLUE
- 10x 4-pin Female Connectors
- 2x 4-pin Floppy Connectors
- 1x 20-pin ATX Connector
- 1x 6-pin Auxillary Connector
- 1x 4-pin 12v Pentium 4 Connector

http://www.3dcool.com/?module=product&cat=111
(note depending on what your PSU has you might need a 24 pin connector for the main)

I got the molex and ATX pin removal tools too

and a bunch of replacement pins and a crimp tool at my local electronic store
but then Im shortening 4 different PSU wiring harnesses for rackmount installation
Im really tired of having a 20" harness when the main power connector is 3" away

I bought from 3Dcool because there was other items thay had there I wanted and svaed on shipping, so shop it if thats all your looking for, you might beat the price, but they where on top of it and contacted me immediately with a small issue with part of my order, then solved it before I was even able to get back to them :D )
 
You must log in or register to reply here.
Back
Top