I got a cisco 2924m xl switch off of ebay, The unit powers up fine and passes the initial testing but after it has been running a while it like crashes i guess. I will look over and all the ports LED's are amber. It also has a WS-x2931-Xl module with a 1000base-sx GBIC installed. The IOS is version 12.0(5)WC9a. I managed to pull this from teraterm
02:38:14: %FRANK-6-MODULE_INSERTED: Module in slot 1 is inserted
02:38:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, ch
anged state to down
02:38:26: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:38:42: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
02:38:43: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to down
02:38:43: %FRANK-6-MODULE_INSERTED: Module in slot 1 is inserted
02:47:24: %FRANK-3-INIT_FAILED:
gi1/1 Initialization failed [0xD ]
02:47:35: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
02:47:36: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to down
02:47:36: %FRANK-6-MODULE_INSERTED: Module in slot 1 is inserted
02:47:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, ch
anged state to down
02:47:37: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:48:21: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:51:19: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:51:19: %FRANK-3-INIT_FAILED:
gi1/1 Initialization failed [0xD ]
02:51:43: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:51:59: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
02:52:00: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to down
02:52:00: %FRANK-6-MODULE_INSERTED: Module in slot 1 is inserted
02:52:00: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, ch
anged state to down
02:52:42: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:54:19: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
02:54:20: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to down
02:54:21: %FRANK-6-MODULE_INSERTED: Module in slot 1 is inserted
02:54:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, ch
anged state to down
02:54:23: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
03:07:04: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
03:07:04: %FRANK-3-INIT_FAILED:
TtL Initialization failed [0xB ]
03:07:13: %RTD-1-DEAD_PHY: The PHY on Fa0/1 is dead
03:07:15: %RTD-1-DEAD_PHY: The PHY on Fa0/2 is dead
03:07:17: %RTD-1-DEAD_PHY: The PHY on Fa0/3 is dead
03:07:20: %RTD-1-DEAD_PHY: The PHY on Fa0/4 is dead
03:07:22: %RTD-1-DEAD_PHY: The PHY on Fa0/5 is dead
03:07:25: %RTD-1-DEAD_PHY: The PHY on Fa0/6 is dead
03:07:27: %RTD-1-DEAD_PHY: The PHY on Fa0/7 is dead
03:07:29: %RTD-1-DEAD_PHY: The PHY on Fa0/8 is dead
03:07:32: %RTD-1-DEAD_PHY: The PHY on Fa0/9 is dead
03:07:34: %RTD-1-DEAD_PHY: The PHY on Fa0/10 is dead
03:07:37: %RTD-1-DEAD_PHY: The PHY on Fa0/11 is dead
03:07:39: %RTD-1-DEAD_PHY: The PHY on Fa0/12 is dead
03:07:41: %RTD-1-DEAD_PHY: The PHY on Fa0/13 is dead
03:07:44: %RTD-1-DEAD_PHY: The PHY on Fa0/14 is dead
03:07:46: %RTD-1-DEAD_PHY: The PHY on Fa0/15 is dead
03:07:48: %RTD-1-DEAD_PHY: The PHY on Fa0/16 is dead
03:07:51: %RTD-1-DEAD_PHY: The PHY on Fa0/17 is dead
03:07:53: %RTD-1-DEAD_PHY: The PHY on Fa0/18 is dead
03:07:56: %RTD-1-DEAD_PHY: The PHY on Fa0/19 is dead
03:07:58: %RTD-1-DEAD_PHY: The PHY on Fa0/20 is dead
03:08:01: %RTD-1-DEAD_PHY: The PHY on Fa0/21 is dead
03:08:05: %RTD-1-DEAD_PHY: The PHY on Fa0/22 is dead
03:08:08: %RTD-1-DEAD_PHY: The PHY on Fa0/23 is dead
03:08:11: %RTD-1-DEAD_PHY: The PHY on Fa0/24 is dead
06:11:4294967296: %SYS-3-CPUHOG: Task ran for 2361 msec (9/1), process = Exec, P
C = 164774.
-Traceback= 164778 164F2C 164E20 17ED18 1E9430
06:11:60129542144: %SYS-3-CPUHOG: Task ran for 2413 msec (4/0), process = Exec,
PC = 164774.
-Traceback= 164778 164F2C 164E20 17ED18 1E9430
06:12:01: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down
06:12:02: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, chang
ed state to down
Is the switch going bad? If so i need to let the company know cause it carrys a 7 day return period. thanks for your time guys
02:38:14: %FRANK-6-MODULE_INSERTED: Module in slot 1 is inserted
02:38:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, ch
anged state to down
02:38:26: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:38:42: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
02:38:43: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to down
02:38:43: %FRANK-6-MODULE_INSERTED: Module in slot 1 is inserted
02:47:24: %FRANK-3-INIT_FAILED:
gi1/1 Initialization failed [0xD ]
02:47:35: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
02:47:36: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to down
02:47:36: %FRANK-6-MODULE_INSERTED: Module in slot 1 is inserted
02:47:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, ch
anged state to down
02:47:37: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:48:21: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:51:19: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:51:19: %FRANK-3-INIT_FAILED:
gi1/1 Initialization failed [0xD ]
02:51:43: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:51:59: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
02:52:00: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to down
02:52:00: %FRANK-6-MODULE_INSERTED: Module in slot 1 is inserted
02:52:00: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, ch
anged state to down
02:52:42: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
02:54:19: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
02:54:20: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to down
02:54:21: %FRANK-6-MODULE_INSERTED: Module in slot 1 is inserted
02:54:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, ch
anged state to down
02:54:23: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
03:07:04: %FRANK-6-MODULE_REMOVED: Module in slot 1 was removed
03:07:04: %FRANK-3-INIT_FAILED:
TtL Initialization failed [0xB ]
03:07:13: %RTD-1-DEAD_PHY: The PHY on Fa0/1 is dead
03:07:15: %RTD-1-DEAD_PHY: The PHY on Fa0/2 is dead
03:07:17: %RTD-1-DEAD_PHY: The PHY on Fa0/3 is dead
03:07:20: %RTD-1-DEAD_PHY: The PHY on Fa0/4 is dead
03:07:22: %RTD-1-DEAD_PHY: The PHY on Fa0/5 is dead
03:07:25: %RTD-1-DEAD_PHY: The PHY on Fa0/6 is dead
03:07:27: %RTD-1-DEAD_PHY: The PHY on Fa0/7 is dead
03:07:29: %RTD-1-DEAD_PHY: The PHY on Fa0/8 is dead
03:07:32: %RTD-1-DEAD_PHY: The PHY on Fa0/9 is dead
03:07:34: %RTD-1-DEAD_PHY: The PHY on Fa0/10 is dead
03:07:37: %RTD-1-DEAD_PHY: The PHY on Fa0/11 is dead
03:07:39: %RTD-1-DEAD_PHY: The PHY on Fa0/12 is dead
03:07:41: %RTD-1-DEAD_PHY: The PHY on Fa0/13 is dead
03:07:44: %RTD-1-DEAD_PHY: The PHY on Fa0/14 is dead
03:07:46: %RTD-1-DEAD_PHY: The PHY on Fa0/15 is dead
03:07:48: %RTD-1-DEAD_PHY: The PHY on Fa0/16 is dead
03:07:51: %RTD-1-DEAD_PHY: The PHY on Fa0/17 is dead
03:07:53: %RTD-1-DEAD_PHY: The PHY on Fa0/18 is dead
03:07:56: %RTD-1-DEAD_PHY: The PHY on Fa0/19 is dead
03:07:58: %RTD-1-DEAD_PHY: The PHY on Fa0/20 is dead
03:08:01: %RTD-1-DEAD_PHY: The PHY on Fa0/21 is dead
03:08:05: %RTD-1-DEAD_PHY: The PHY on Fa0/22 is dead
03:08:08: %RTD-1-DEAD_PHY: The PHY on Fa0/23 is dead
03:08:11: %RTD-1-DEAD_PHY: The PHY on Fa0/24 is dead
06:11:4294967296: %SYS-3-CPUHOG: Task ran for 2361 msec (9/1), process = Exec, P
C = 164774.
-Traceback= 164778 164F2C 164E20 17ED18 1E9430
06:11:60129542144: %SYS-3-CPUHOG: Task ran for 2413 msec (4/0), process = Exec,
PC = 164774.
-Traceback= 164778 164F2C 164E20 17ED18 1E9430
06:12:01: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down
06:12:02: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, chang
ed state to down
Is the switch going bad? If so i need to let the company know cause it carrys a 7 day return period. thanks for your time guys