https://www.tedss.com/SKA220M2EJ27 the above is the capacitor that I own. It last only 7 yr. The symptoms currently on this control board is : sometimes it turns on, sometimes it does not turn on at all, the board is for a washer, which is the reason I suspect the capacitors have failed the spec. is Jamiecon, made in Taiwan, 22 uF, 250V this is the actual photo of the circuit board https://picclick.com/Maytag-Whirlpo...Control-Board-W10296024-Rev-303101616967.html I went to digikey.com and found 160 listing w/ the above https://www.digikey.com/products/en/capacitors/aluminum-electrolytic-capacitors/58?k=250v 22uf I have the following questions: 1) these spec. doesn't look that impressive, it says only 12K hr. at 105 deg. C, so what is the MTBF at say 30 deg. C? 2) in regards to Ripple Current at Low Frequency, is 225 mA better than 300mA? which one should I pick? 3) in regards to Ripple Current at High Frequency, is 450 mA better than 600mA? which one should I pick? 4) does Japanese brand such as Nichicon usually means the capacitor is made in japan?