noclevername
Gawd
- Joined
- Feb 22, 2016
- Messages
- 545
I have never had the pleasure of overclocking something this old. I started with my 2500k, then 2600k, than 4790k, lastly 7700k. I told my friend I would do what I could, but I am having hard times getting it stable. I will get full specs when I return home so I can get board model number.
The processor in question is an e6400. Motherboard is a decent gigabyte board, and has 2 gigs of 1066 DDR2.
Every time I get anywhere above 2.3Ghz it crashes and resets itself to stock. Upon entering BIOS it gives me a warning the overclock failed and that it reverted back to stock. The best I have got was ram at stock speed and voltage, but the CPU to 8x multiplier and 280mhz base at 1.315v.
Any ideas on how to push this chip further. I did see some people were able to clock this thing pretty dam high for a dual core.
The processor in question is an e6400. Motherboard is a decent gigabyte board, and has 2 gigs of 1066 DDR2.
Every time I get anywhere above 2.3Ghz it crashes and resets itself to stock. Upon entering BIOS it gives me a warning the overclock failed and that it reverted back to stock. The best I have got was ram at stock speed and voltage, but the CPU to 8x multiplier and 280mhz base at 1.315v.
Any ideas on how to push this chip further. I did see some people were able to clock this thing pretty dam high for a dual core.