MSI MAG B650 Tomahawk Boot Issue

[Odigo]

Edit: Fixed.. was a monitor issue.. smh

Recently updated to the latest "beta" BIOS.. It updated fine, and I was able to get into the BIOS. I enabled EXPO and had a issue rebooting. I cleared the CMOS once again and was able to get into the BIOS. I reset all to defaults and tried to reboot. Now I get no display, with sometimes a BOOT debug LED. I tried to clear the CMOS again with no luck. I removed the GPU, SSD, and one memory stick and I still have the issue. I attempted to to FLASH BACK to a older version. LED flashed for 5min like it was updating.. still won't boot. Any suggestions?

 

[pendragon1]

how are you clearing the cmos? battery out, power out(hit power button and wait 5min)?

 

[Odigo]

First time was with the jumper. Second time, and every time going forward CMOS battery removed for 5 minutes. I even tried booting with no CMOS battery. I have also left it unplugged physically overnight.

 

[pendragon1]

pull the cpu and power it up. let it sit for a minute. power it off, reseat the cpu while putting pressure in the middle and lock it down. try again.