supastar1568
Limp Gawd
- Joined
- Jul 19, 2006
- Messages
- 470
Hey folks,
I'm finally able to get my e8400 stable at 3.8 Ghz. Probably stop it at here for a while. Right now I'm running a 475 FSB with a 1:1 ram divider and an 8x multi. 475 x 8, 3.8Ghz, ram running at 475, with timings of 5-5-5-15.
My question is, would I be better off running, 423 x 8, 3.8Ghz, and using a 5:2 divider, allowing my memory to run at 523 Mhz.
I ask, because my stock ram speed is 1066 Mhz.
I''ve been hearing that a 1:1 is better, but I would like to confirm. (I've tried tightening the timing at 475 to 4-4-4-12 with no luck)
I'm finally able to get my e8400 stable at 3.8 Ghz. Probably stop it at here for a while. Right now I'm running a 475 FSB with a 1:1 ram divider and an 8x multi. 475 x 8, 3.8Ghz, ram running at 475, with timings of 5-5-5-15.
My question is, would I be better off running, 423 x 8, 3.8Ghz, and using a 5:2 divider, allowing my memory to run at 523 Mhz.
I ask, because my stock ram speed is 1066 Mhz.
I''ve been hearing that a 1:1 is better, but I would like to confirm. (I've tried tightening the timing at 475 to 4-4-4-12 with no luck)