Measurements of DFI JR 790GX Mobo

[Wizlah]

I jumped the gun last year and grabbed one of the first 780g mobos out of necessity. I'd like to upgrade the mobo to a dfi Jr 790gx, but wanted to get feedback from people who have them about some measurements on the board. Could someone post the distance (in mm) of both pciex8 slots to the edge of the board (i've indicated on the image below the two measurements I'm looking for)? I need to check that my cooling solution on my 4870 will fit okay.

 

[TGA]

The placement of those slots is a standard so they match up with the case. And I believe they are placed on 2cm centers. Knowing that and looking at the picture you looking at something like 8cm for the long line and 4cm for the short one.

That said I can't even begin to imagine what a cooling solution would have to do with where the board was cut off. But like I said slot placement is a standard so you can take a tape measure to your own board to see if you have room. Odds are your board has the PCI-E slots in the exact same place already.