undertaker2k8
[H]ard|Gawd
- Joined
- Jul 25, 2012
- Messages
- 1,984
I'm in display hell again , decided to switch my secondary 2333HD monitor to ZR2440W to match my existing ZR24W and thats when the problems started, the ZR2440W colors and hue were way off and no amount of manual tweaking would fix that. Tried a spyder 4 pro to get them to look right but to no avail. Not having much luck with my current iDisplay pro either.
So I decided to temporarily ditch the ZR2440W and go to a single monitor setup and just calibrate my zr24w. While calibration was a mixed bag, what alarms me most now is that IPS glow now seems through the roof, where as previously the blacks on it were pure black.
Obviously, I have tried resetting all monitor settings to default, using my older stock profile and removing any profiler software to no avail.
I have also noticed that bios screen too has the glow now so it may be at the monitor hardware level: may be the calibrators permanently screwed up the monitor gamme/LUT ?
Not sure if this makes sense but this is what I saw...kind of wish I had left things as is...
Any experts advice will be much appreciated at this point.
So I decided to temporarily ditch the ZR2440W and go to a single monitor setup and just calibrate my zr24w. While calibration was a mixed bag, what alarms me most now is that IPS glow now seems through the roof, where as previously the blacks on it were pure black.
Obviously, I have tried resetting all monitor settings to default, using my older stock profile and removing any profiler software to no avail.
I have also noticed that bios screen too has the glow now so it may be at the monitor hardware level: may be the calibrators permanently screwed up the monitor gamme/LUT ?
Not sure if this makes sense but this is what I saw...kind of wish I had left things as is...
Any experts advice will be much appreciated at this point.